PartsTable
Technical Data Sheet
Download PDF

103101 — TERMINAL,LUG

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

103101: TERMINAL,LUG.

The TERMINAL,LUG is a the manufacturer industrial component. Key specifications include width: 11.440 INCHES MINIMUM AND 11.740 INCHES MAXIMUM IN, height: 6.350 INCHES MINIMUM AND 6.650 INCHES MAXIMUM IN, length: 74.590 INCHES MINIMUM AND 74.910 INCHES MAXIMUM IN, material: STEEL CORROSION RESISTING, nut_style: HEXAGON, head_style: FILLISTER. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-010-3101, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
103101
NSN: 5310-00-010-3101
NIINs: 000103101, 008279139, 008496607, 009059276, 011478615, 011666021, 013288064, 013713975, 014839616
FSC: 5310 — Nuts and Washers
CAGE: 12204 — CHRYSLER REALTY COMPANY LLC DBA DAIMLER CHRYSLER (USA)
SPECIFICATIONS
width11.440 INCHES MINIMUM AND 11.740 INCHES MAXIMUM IN
height6.350 INCHES MINIMUM AND 6.650 INCHES MAXIMUM IN
length74.590 INCHES MINIMUM AND 74.910 INCHES MAXIMUM IN
materialSTEEL CORROSION RESISTING
nut_styleHEXAGON
head_styleFILLISTER
nut_height0.087 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
head_height0.134 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN
power_sourceEXTERNAL
thread_class2B
head_diameter0.334 INCHES MINIMUM AND 0.357 INCHES MAXIMUM IN
thread_length0.792 INCHES MINIMUM IN
NSN5310-00-010-3101
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 103101 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.362 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
NUT HEIGHT: 0.117 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
NUT STYLE: SQUARE
•
THREAD CLASS: 2B
•
THREAD QUANTITY PER INCH: 32
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.362 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
NUT HEIGHT0.117 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
NUT STYLESQUARE
THREAD CLASS2B
THREAD QUANTITY PER INCH32
MATERIALSTEEL OVERALL
BEARING SURFACE TYPEFLAT
SUBSTITUTES & CROSS-REFERENCES 2
MILB933TYPEBReference document
Same NSN cross-reference
Reference document — Identification reference
34141SReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 103101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 103101?
103101 is a TERMINAL,LUG.
What parts can replace 103101?
There are 2 known substitutes for 103101: MILB933TYPEB, 34141S. Substitute compatibility should be verified for your specific system.
What is the NSN for 103101?
103101 is cataloged in the U.S. Government catalog under NSN 5310-00-010-3101. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 103101

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.