PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ZZH611GRADEB
ZZH611GRADEB ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include connection_type: THREADED EXTERNAL PIPE FIRST END, inside_diameter: 1.500 INCHES NOMINAL IN, connection_style: PLAIN FIRST END, thread_direction: RIGHT-HAND FIRST END, operating_pressure: 125.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS, burst_test_pressure: 500.0 POUNDS PER SQUARE INCH LBS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-425-9784, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ZZH611GRADEB
NSN: 4720-00-425-9784
FSC: 4720
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
connection_typeTHREADED EXTERNAL PIPE FIRST END
inside_diameter1.500 INCHES NOMINAL IN
connection_stylePLAIN FIRST END
thread_directionRIGHT-HAND FIRST END
operating_pressure125.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure500.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size1.500 INCHES FIRST END IN
end_connection_designSTRAIGHT FIRST END
inside_surface_conditionSMOOTH
media_for_which_designedWATER, FRESH SINGLE RESPONSE
thread_series_designatorNPT FIRST END
hydrostatic_test_pressure250.0 POUNDS PER SQUARE INCH LBS
NSN4720-00-425-9784
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: ZZH611GRADEB · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES DESIGNATOR: NPT FIRST END
•
MEASURING METHOD AND LENGTH: 300.000 INCHES NOMINAL EXCLUDING END FITTINGS IN
•
NONDEFINITIVE SPEC/STD DATA: B GRADE
•
SPECIFICATION/STANDARD DATA: 81348-ZZ-H-611 GOVERNMENT SPECIFICATION
•
OUTER COVERING ENVIRONMENTAL PROTECTION: ABRASION RESISTANT
•
HYDROSTATIC TEST PRESSURE: 250.0 POUNDS PER SQUARE INCH LBS
•
OPERATING PRESSURE: 125.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
•
CONNECTION STYLE: PLAIN FIRST END
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIES DESIGNATORNPT FIRST END
MEASURING METHOD AND LENGTH300.000 INCHES NOMINAL EXCLUDING END FITTINGS IN
NONDEFINITIVE SPEC/STD DATAB GRADE
SPECIFICATION/STANDARD DATA81348-ZZ-H-611 GOVERNMENT SPECIFICATION
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT
HYDROSTATIC TEST PRESSURE250.0 POUNDS PER SQUARE INCH LBS
OPERATING PRESSURE125.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
CONNECTION STYLEPLAIN FIRST END
LAYER COMPOSITION AND LOCATION2ND LAYER RUBBER IMPREGNATED COTTON FABRIC AND 1ST LAYER RUBBER IMPREGNATED COTTON FABRIC AND OUTER LAYER SPIRALLY WRAPPED RUBBER FABRIC
END CONNECTION DESIGNSTRAIGHT FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
W8322Interchangeable
interchangeable cross-reference
interchangeable
6090658-1Interchangeable
interchangeable cross-reference
interchangeable
8322Interchangeable
interchangeable cross-reference
interchangeable
MIL-PRF-1/1634Interchangeable
interchangeable cross-reference
interchangeable
MILE1-1634Interchangeable
interchangeable cross-reference
interchangeable
CMP832-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ZZH611GRADEB?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ZZH611GRADEB?
ZZH611GRADEB is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace ZZH611GRADEB?
There are 16 known substitutes for ZZH611GRADEB: W8322, 6090658-1, 8322 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ZZH611GRADEB?
ZZH611GRADEB is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-425-9784. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ZZH611GRADEB

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026