ZZ-I-550E — INNER TUBE,PNEUMATIC TIRE,VEHICU

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

ZZ-I-550E: INNER TUBE,PNEUMATIC TIRE,VEHICU.

INNER TUBE,PNEUMATIC TIRE,VEHICU. Key specifications include material: RUBBER SYNTHETIC BODY, construction: RADIAL, accessory_type: INNER TUBE, size_designation: 12.00-20, special_features: VALVE EXTENSION MAY BE USED 2640-00-200-1934 AND VALVE CAP MAY BE USED 2640-01-098-2029, base_construction: STANDARD. This part is cataloged in the U.S.

Government catalog under NSN 2610-00-029-0559, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

ZZ-I-550E

NSN: 2610-00-029-0559
NIINs: 000290559, 000290562, 005287831, 007219279, 007644421, 014124635, 014766072
FSC: 2610 — Tires and Tubes, Pneumatic, Except Aircraft
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)

SPECIFICATIONS

material	RUBBER SYNTHETIC BODY
construction	RADIAL
accessory_type	INNER TUBE
size_designation	12.00-20
special_features	VALVE EXTENSION MAY BE USED 2640-00-200-1934 AND VALVE CAP MAY BE USED 2640-01-098-2029
base_construction	STANDARD
application_design	TRUCK AND BUS
item_type_category	ACCESSORY
operating_temp_range	-65.0 TO 125.0 CELSIUS DEGC
inflation_device_type	TR-445
tire_valve_designation	TR445
minimum_tensile_strength	1200 POUNDS PER SQUARE INCH LBS
NSN	2610-00-029-0559

COMPONENT DIAGRAM

KEY FEATURES

•

TIRE VALVE DESIGNATION: TR443

•

INFLATION DEVICE POSITION: ON CENTER

•

BASE CONSTRUCTION: STANDARD

•

SIZE DESIGNATION: 9.00-20

•

ACCESSORY TYPE: INNER TUBE

•

NONDEFINITIVE SPEC/STD DATA: 2 GROUP

•

MINIMUM TENSILE STRENGTH: 1200 POUNDS PER SQUARE INCH LBS

TECHNICAL CHARACTERISTICS

TIRE VALVE DESIGNATION	TR443
INFLATION DEVICE POSITION	ON CENTER
BASE CONSTRUCTION	STANDARD
SIZE DESIGNATION	9.00-20
ACCESSORY TYPE	INNER TUBE
NONDEFINITIVE SPEC/STD DATA	2 GROUP
SPECIAL FEATURES	LENGTH 4.92 INCHES STRAIGHT; 4.5 INCHES BENT; USED ON AF; AIR ROTARY COMPRESSOR MODEL DR600 IN
MINIMUM TENSILE STRENGTH	1200 POUNDS PER SQUARE INCH LBS
OPERATING TEMP RANGE	-40.0 TO 51.7 CELSIUS DEGC
APPLICATION DESIGN	TRUCK AND BUS

SUBSTITUTES & CROSS-REFERENCES 6

9.00-20Reference document

Same NSN cross-reference

Reference document — Secondary reference

GP2/9.00R20/TR443/ON CENTERSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

503-088Reference document

Same NSN cross-reference

Reference document — Secondary reference

193-962-300Reference document

Same NSN cross-reference

Reference document — Secondary reference

2610000290559Reference document

Same NSN cross-reference

Reference document — Informative reference only

512-362Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy ZZ-I-550E?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is ZZ-I-550E?

ZZ-I-550E is a INNER TUBE,PNEUMATIC TIRE,VEHICU.

What parts can replace ZZ-I-550E?

There are 6 known substitutes for ZZ-I-550E: 9.00-20, GP2/9.00R20/TR443/ON CENTER, 503-088 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for ZZ-I-550E?

ZZ-I-550E is cataloged in the U.S. Government catalog under NSN 2610-00-029-0559. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

ZZ-I-550E — INNER TUBE,PNEUMATIC TIRE,VEHICU

Request a Quote — ZZ-I-550E