PartsTable
Technical Data Sheet

ZX-10129/038117 — SEAL,NONMETALLIC SPECIAL SHAPED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

ZX-10129/038117: SEAL,NONMETALLIC SPECIAL SHAPED.

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include material: RUBBER FLUOROSILICONE CLASS FQ OVERALL, construction: SOLIDSOLID, fabrication_method: SOLIDSOLID, cross-sectional_width: 1.031 INCHES NOMINAL1.031 INCHES NOMINAL IN, cross-sectional_height: 0.484 INCHES NOMINAL0.484 INCHES NOMINAL IN, cross-sectional_thickness: 0.109 INCHES NOMINAL0.109 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-587-3586, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ZX-10129/038117
NSN: 5330-00-587-3586
FSC: 5330 — Packing and Gasket Materials
CAGE: 76385 — MINOR RUBBER CO INC (USA)
SPECIFICATIONS
materialRUBBER FLUOROSILICONE CLASS FQ OVERALL
constructionSOLIDSOLID
fabrication_methodSOLIDSOLID
cross-sectional_width1.031 INCHES NOMINAL1.031 INCHES NOMINAL IN
cross-sectional_height0.484 INCHES NOMINAL0.484 INCHES NOMINAL IN
cross-sectional_thickness0.109 INCHES NOMINAL0.109 INCHES NOMINAL IN
cross-sectional_shape_styleP SHAPEP SHAPE
material_document_and_classificationMIL-R-25988 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-587-3586
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ZX-10129/038117 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.109 INCHES NOMINAL0.109 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.484 INCHES NOMINAL0.484 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 1.031 INCHES NOMINAL1.031 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-25988 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: P SHAPEP SHAPE
•
MATERIAL: RUBBER FLUOROSILICONE CLASS FQ OVERALL
•
FABRICATION METHOD: SOLIDSOLID
•
CONSTRUCTION: SOLIDSOLID
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.109 INCHES NOMINAL0.109 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.484 INCHES NOMINAL0.484 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH1.031 INCHES NOMINAL1.031 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-25988 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLEP SHAPEP SHAPE
MATERIALRUBBER FLUOROSILICONE CLASS FQ OVERALL
FABRICATION METHODSOLIDSOLID
CONSTRUCTIONSOLIDSOLID
SUBSTITUTES & CROSS-REFERENCES 3
ZX10129Reference document
Same NSN cross-reference
Reference document — Secondary reference
038117Reference document
Same NSN cross-reference
Reference document — Secondary reference
142-0860-25-0Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy ZX-10129/038117?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ZX-10129/038117?
ZX-10129/038117 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What parts can replace ZX-10129/038117?
There are 3 known substitutes for ZX-10129/038117: ZX10129, 038117, 142-0860-25-0. Substitute compatibility should be verified for your specific system.
What is the NSN for ZX-10129/038117?
ZX-10129/038117 is cataloged in the U.S. Government catalog under NSN 5330-00-587-3586. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ZX-10129/038117

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.