PartsTable
Technical Data Sheet
Download PDF

ZSP3-304-3 — HANDLE,BAIL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

ZSP3-304-3: HANDLE,BAIL.

The HANDLE,BAIL is a the manufacturer industrial component. Key specifications include material: ALUMINUM AND RUBBER SYNTHETIC HANDLE, inside_length: 5.380 INCHES NOMINAL IN, stock_diameter: 0.690 INCHES NOMINAL IN, mounting_method: MOUNTING PLATE, handle_clearance: 3.190 INCHES NOMINAL IN, special_features: ALUMINUM WITH NEOPRENE MOLDED GRIP;BAIL HAS 180DEGREE FREE SWING;DESIGN LOAD-50 LBS LBS. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-542-0307, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ZSP3-304-3
NSN: 5340-01-542-0307
FSC: 5340 — Hardware, Commercial
CAGE: 1YBZ0 — ZERO MFG INC (USA)
SPECIFICATIONS
materialALUMINUM AND RUBBER SYNTHETIC HANDLE
inside_length5.380 INCHES NOMINAL IN
stock_diameter0.690 INCHES NOMINAL IN
mounting_methodMOUNTING PLATE
handle_clearance3.190 INCHES NOMINAL IN
special_featuresALUMINUM WITH NEOPRENE MOLDED GRIP;BAIL HAS 180DEGREE FREE SWING;DESIGN LOAD-50 LBS LBS
style_designatorD
features_providedHANDLE ROTATING FEATURE
mounting_plate_styleOVAL
end_item_identificationCONTAINER;SUPPORT EQUIPMENT FOR THE V-22
part_name_assigned_by_controlling_agency(INAVY)HANDLE ASSEMBLY,AIRCRAFT MATERIAL
NSN5340-01-542-0307
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ZSP3-304-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE LENGTH: 5.380 INCHES NOMINAL IN
•
MOUNTING METHOD: MOUNTING PLATE
•
STYLE DESIGNATOR: D
•
FEATURES PROVIDED: HANDLE ROTATING FEATURE
•
HANDLE CLEARANCE: 3.190 INCHES NOMINAL IN
•
STOCK DIAMETER: 0.690 INCHES NOMINAL IN
•
COLOR: GRAY/GREY HANDLE
TECHNICAL CHARACTERISTICS
INSIDE LENGTH5.380 INCHES NOMINAL IN
MOUNTING METHODMOUNTING PLATE
STYLE DESIGNATORD
FEATURES PROVIDEDHANDLE ROTATING FEATURE
HANDLE CLEARANCE3.190 INCHES NOMINAL IN
STOCK DIAMETER0.690 INCHES NOMINAL IN
COLORGRAY/GREY HANDLE
SPECIAL FEATURESALUMINUM WITH NEOPRENE MOLDED GRIP;BAIL HAS 180DEGREE FREE SWING;DESIGN LOAD-50 LBS LBS
MOUNTING PLATE STYLEOVAL
PART NAME ASSIGNED BY CONTROLLING AGENCY(INAVY)HANDLE ASSEMBLY,AIRCRAFT MATERIAL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy ZSP3-304-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ZSP3-304-3?
ZSP3-304-3 is a HANDLE,BAIL.
What is the NSN for ZSP3-304-3?
ZSP3-304-3 is cataloged in the U.S. Government catalog under NSN 5340-01-542-0307. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ZSP3-304-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.