PartsTable
Technical Data Sheet
Download PDF

ZL1042 — STRIKE,CATCH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

ZL1042: STRIKE,CATCH.

The STRIKE,CATCH is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, opening_width: 0.170 INCHES NOMINAL IN, opening_length: 0.562 INCHES NOMINAL IN, overall_length: 1.000 INCHES NOMINAL IN, surface_treatment: UNABLE TO DECODE, material_thickness: 0.093 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-957-5942, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ZL1042
NSN: 5340-00-957-5942
FSC: 5340 — Hardware, Commercial
CAGE: 06004 — STEWART-WARNER BASSICK CORP (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
opening_width0.170 INCHES NOMINAL IN
opening_length0.562 INCHES NOMINAL IN
overall_length1.000 INCHES NOMINAL IN
surface_treatmentUNABLE TO DECODE
material_thickness0.093 INCHES NOMINAL IN
first_surface_hole_size0.135 INCHES NOMINAL IN
first_surface_hole_quantity2
NSN5340-00-957-5942
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ZL1042 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPENING LENGTH: 0.562 INCHES NOMINAL IN
•
OPENING WIDTH: 0.170 INCHES NOMINAL IN
•
FIRST SURFACE HOLE SIZE: 0.135 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.093 INCHES NOMINAL IN
•
SURFACE TREATMENT: UNABLE TO DECODE
•
MATERIAL: UNABLE TO DECODE
•
FIRST SURFACE HOLE QUANTITY: 2
TECHNICAL CHARACTERISTICS
OPENING LENGTH0.562 INCHES NOMINAL IN
OPENING WIDTH0.170 INCHES NOMINAL IN
OVERALL LENGTH1.000 INCHES NOMINAL IN
FIRST SURFACE HOLE SIZE0.135 INCHES NOMINAL IN
MATERIAL THICKNESS0.093 INCHES NOMINAL IN
SURFACE TREATMENTUNABLE TO DECODE
MATERIALUNABLE TO DECODE
FIRST SURFACE HOLE QUANTITY2
SUBSTITUTES & CROSS-REFERENCES 4
505556Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HS11Reference document
Same NSN cross-reference
Reference document — Secondary reference
505557Reference document
Same NSN cross-reference
Reference document — Secondary reference
505556-ZL1042Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy ZL1042?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ZL1042?
ZL1042 is a STRIKE,CATCH.
What parts can replace ZL1042?
There are 4 known substitutes for ZL1042: 505556, HS11, 505557 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ZL1042?
ZL1042 is cataloged in the U.S. Government catalog under NSN 5340-00-957-5942. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ZL1042