PartsTable
Technical Data Sheet
PartsTable / COMPONENT / Z99506J
Z99506J ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, bore_shape: STRAIGHT, bore_diameter: 1.1809 INCHES MINIMUM AND 1.1811 INCHES MAXIMUM IN, overall_width: 0.6249 INCHES MINIMUM AND 0.6299 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-485-7597, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Z99506J
NSN: 3110-00-485-7597
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL RETAINER
bore_shapeSTRAIGHT
bore_diameter1.1809 INCHES MINIMUM AND 1.1811 INCHES MAXIMUM IN
overall_width0.6249 INCHES MINIMUM AND 0.6299 INCHES MAXIMUM IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
lubrication_materialLUBRICANT
overall_outside_diameter2.4407 INCHES MINIMUM AND 2.4409 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
NSN3110-00-485-7597
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: Z99506J · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
MATERIAL: RUBBER SYNTHETIC SEAL
•
BEARING SEAL TYPE: CONTACT
•
SURFACE FINISH: GROUND
•
BORE SHAPE: STRAIGHT
•
MATERIAL DOCUMENT AND CLASSIFICATION: 03-6006-06,31435 MFR REF SINGLE MATERIAL RESPONSE SEAL
•
SEAL QUANTITY: 2
•
RETAINER FABRICATION METHOD: PRESSED
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL FIT-UP DESIGNATIONSTANDARD
MATERIALRUBBER SYNTHETIC SEAL
BEARING SEAL TYPECONTACT
SURFACE FINISHGROUND
BORE SHAPESTRAIGHT
MATERIAL DOCUMENT AND CLASSIFICATION03-6006-06,31435 MFR REF SINGLE MATERIAL RESPONSE SEAL
SEAL QUANTITY2
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALLUBRICANT
LOAD DIRECTIONRADIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
22HS682Interchangeable
interchangeable cross-reference
interchangeable
99506Interchangeable
interchangeable cross-reference
interchangeable
6206DDUCE1SA2Interchangeable
interchangeable cross-reference
interchangeable
6206-2RS-LBInterchangeable
interchangeable cross-reference
interchangeable
8436800-14Interchangeable
interchangeable cross-reference
interchangeable
0892Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy Z99506J?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Z99506J?
Z99506J is a BEARING,BALL,ANNULAR.
What parts can replace Z99506J?
There are 11 known substitutes for Z99506J: 22HS682, 99506, 6206DDUCE1SA2 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for Z99506J?
Z99506J is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-485-7597. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Z99506J

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026