PartsTable
Technical Data Sheet
Download PDF

Z99502ABSY1Z8 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

Z99502ABSY1Z8: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, bore_shape: STRAIGHT, bore_diameter: 0.5000 INCHES NOMINAL IN, overall_width: 11.00 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-127-8082, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Z99502ABSY1Z8
NSN: 3110-01-127-8082
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL RETAINER
bore_shapeSTRAIGHT
bore_diameter0.5000 INCHES NOMINAL IN
overall_width11.00 MILLIMETERS NOMINAL MM
seal_quantity2
load_directionRADIAL
surface_finishGROUND
special_featuresLOW SPEED TEST; 75 PERCENT FULL OF SPECIFIED LUBRICANT; FURNISHED WITH 9 BALLS,0.2100 IN. DIA; RADIAL CLEARANCE MUST BE TESTED UNDER A 3 LB PLUS OR MINIS 4 OUNCE GAUGE LOAD LBS
bearing_seal_typeCONTACT
features_providedSNAP RING-GROOVE MOUNTING
internal_clearance0.0020 INCHES MINIMUM RADIAL AND 0.0080 INCHES MAXIMUM RADIAL IN
lubrication_materialGREASE
NSN3110-01-127-8082
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: Z99502ABSY1Z8 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
INTERNAL CLEARANCE: 0.0020 INCHES MINIMUM RADIAL AND 0.0080 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 35.00 MILLIMETERS NOMINAL MM
•
FEATURES PROVIDED: SNAP RING-GROOVE MOUNTING
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
INTERNAL CLEARANCE0.0020 INCHES MINIMUM RADIAL AND 0.0080 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
OVERALL WIDTH11.00 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER35.00 MILLIMETERS NOMINAL MM
FEATURES PROVIDEDSNAP RING-GROOVE MOUNTING
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SUBSTITUTES & CROSS-REFERENCES 1
40763-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy Z99502ABSY1Z8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Z99502ABSY1Z8?
Z99502ABSY1Z8 is a BEARING,BALL,ANNULAR.
What parts can replace Z99502ABSY1Z8?
There is 1 known substitute for Z99502ABSY1Z8: 40763-6. Substitute compatibility should be verified for your specific system.
What is the NSN for Z99502ABSY1Z8?
Z99502ABSY1Z8 is cataloged in the U.S. Government catalog under NSN 3110-01-127-8082. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Z99502ABSY1Z8