PartsTable
Technical Data Sheet
PartsTable / COMPONENT / Z993L03LR1MV
Z993L03LR1MV ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, bore_shape: STRAIGHT, bore_diameter: 17.00 MILLIMETERS NOMINAL MM, overall_width: 10.00 MILLIMETERS NOMINAL MM, alignment_type: RIGID, load_direction: RADIAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-540-4619, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Z993L03LR1MV
NSN: 3110-00-540-4619
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL RETAINER
bore_shapeSTRAIGHT
bore_diameter17.00 MILLIMETERS NOMINAL MM
overall_width10.00 MILLIMETERS NOMINAL MM
seal_quantity2
alignment_typeRIGID
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
internal_clearance0.0004 INCHES MINIMUM RADIAL AND 0.0009 INCHES MAXIMUM RADIAL IN
NSN3110-00-540-4619
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: Z993L03LR1MV · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
•
LUBRICATION MATERIAL: GREASE
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
•
INTERNAL FIT-UP DESIGNATION: LOOSE
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH11.0 MILLIMETERS NOMINAL MM
SURFACE FINISHGROUND
SHIELD QUANTITY2
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
LUBRICATION MATERIALGREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
INTERNAL FIT-UP DESIGNATIONLOOSE
RETAINER FABRICATION METHODPRESSED
STANDARD TOLERANCE DESIGNATIONABEC NO.1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
10107388Interchangeable
interchangeable cross-reference
interchangeable
X13073Interchangeable
interchangeable cross-reference
interchangeable
15BC02Interchangeable
interchangeable cross-reference
interchangeable
321-1210Interchangeable
interchangeable cross-reference
interchangeable
53435Interchangeable
interchangeable cross-reference
interchangeable
TABLE 15, 1210Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy Z993L03LR1MV?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Z993L03LR1MV?
Z993L03LR1MV is a BEARING,BALL,ANNULAR.
What parts can replace Z993L03LR1MV?
There are 31 known substitutes for Z993L03LR1MV: 10107388, X13073, 15BC02 and 28 more. Substitute compatibility should be verified for your specific system.
Is Z993L03LR1MV still available?
Z993L03LR1MV is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Z993L03LR1MV

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026