PartsTable
Technical Data Sheet
PartsTable / COMPONENT / Z97603X1C
Z97603X1C ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL LOADING GROOVE SIDE, bore_shape: STRAIGHT, bore_diameter: 17.00 MILLIMETERS NOMINAL MM, overall_width: 14.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-142-5977, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Z97603X1C
NSN: 3110-00-142-5977
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL LOADING GROOVE SIDE
bore_shapeSTRAIGHT
bore_diameter17.00 MILLIMETERS NOMINAL MM
overall_width14.0 MILLIMETERS NOMINAL MM
seal_quantity1
load_directionRADIAL
surface_finishGROUND
shield_quantity1
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
lubrication_materialGREASE
overall_outside_diameter47.00 MILLIMETERS NOMINAL MM
NSN3110-00-142-5977
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: Z97603X1C · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL BALL
•
BORE SHAPE: STRAIGHT
•
BEARING SEAL TYPE: CONTACT
•
SHIELD QUANTITY: 1
•
SURFACE FINISH: GROUND
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: ANDOK C,FSCM 29700 MFR REF SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL BALL
MATERIALSTEEL INNER RING
BORE SHAPESTRAIGHT
MATERIALSTEEL OUTER RING
BEARING SEAL TYPECONTACT
SHIELD QUANTITY1
SURFACE FINISHGROUND
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONANDOK C,FSCM 29700 MFR REF SINGLE MATERIAL RESPONSE
STANDARD TOLERANCE DESIGNATIONABEC NO.1
MATERIALSTEEL LOADING GROOVE SIDE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
SCD106725-5Interchangeable
interchangeable cross-reference
interchangeable
9164Interchangeable
interchangeable cross-reference
interchangeable
4SEInterchangeable
interchangeable cross-reference
interchangeable
17314Interchangeable
interchangeable cross-reference
interchangeable
1656247Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy Z97603X1C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Z97603X1C?
Z97603X1C is a BEARING,BALL,ANNULAR.
What parts can replace Z97603X1C?
There are 5 known substitutes for Z97603X1C: SCD106725-5, 9164, 4SE and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for Z97603X1C?
Z97603X1C is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-142-5977. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Z97603X1C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026