PartsTable
Technical Data Sheet
PartsTable / COMPONENT / Z9509XR1V
Z9509XR1V ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, bore_shape: STRAIGHT, bore_diameter: 45.00 MILLIMETERS NOMINAL MM, overall_width: 19.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-107-7556, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Z9509XR1V
NSN: 3110-00-107-7556
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL RETAINER
bore_shapeSTRAIGHT
bore_diameter45.00 MILLIMETERS NOMINAL MM
overall_width19.0 MILLIMETERS NOMINAL MM
seal_quantity1
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
overall_outside_diameter85.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.1
NSN3110-00-107-7556
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: Z9509XR1V · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 45.00 MILLIMETERS NOMINAL MM
•
SEAL QUANTITY: 1
•
MATERIAL: STEEL INNER RING
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER45.00 MILLIMETERS NOMINAL MM
SEAL QUANTITY1
MATERIALSTEEL INNER RING
MATERIALSTEEL RETAINER
MATERIALSTEEL BALL
MATERIALRUBBER SYNTHETIC SEAL
INTERNAL FIT-UP DESIGNATIONSTANDARD
STANDARD TOLERANCE DESIGNATIONABEC NO.1
MATERIALSTEEL OUTER RING
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
6209RSInterchangeable
interchangeable cross-reference
interchangeable
1-4935Interchangeable
interchangeable cross-reference
interchangeable
FFB171Interchangeable
interchangeable cross-reference
interchangeable
35445Interchangeable
interchangeable cross-reference
interchangeable
GB335L20Interchangeable
interchangeable cross-reference
interchangeable
H9509Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy Z9509XR1V?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Z9509XR1V?
Z9509XR1V is a BEARING,BALL,ANNULAR.
What parts can replace Z9509XR1V?
There are 18 known substitutes for Z9509XR1V: 6209RS, 1-4935, FFB171 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for Z9509XR1V?
Z9509XR1V is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-107-7556. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Z9509XR1V

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026