PartsTable
Technical Data Sheet
PartsTable / COMPONENT / Z93L01LR1
Z93L01LR1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, bore_diameter: 12.00 MILLIMETERS NOMINAL MM, overall_width: 8.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-205-3473, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Z93L01LR1
NSN: 3110-00-205-3473
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_shapeSTRAIGHT
bore_diameter12.00 MILLIMETERS NOMINAL MM
overall_width8.0 MILLIMETERS NOMINAL MM
seal_quantity1
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
lubrication_materialLUBRICANT
overall_outside_diameter28.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationLOOSE
NSN3110-00-205-3473
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: Z93L01LR1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL BALL
•
OVERALL OUTSIDE DIAMETER: 28.00 MILLIMETERS NOMINAL MM
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: LUBRICANT
•
LOAD DIRECTION: RADIAL
•
SEAL QUANTITY: 1
•
INTERNAL FIT-UP DESIGNATION: LOOSE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL BALL
MATERIALSTEEL OUTER RING
OVERALL OUTSIDE DIAMETER28.00 MILLIMETERS NOMINAL MM
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALLUBRICANT
LOAD DIRECTIONRADIAL
SEAL QUANTITY1
INTERNAL FIT-UP DESIGNATIONLOOSE
RETAINER FABRICATION METHODPRESSED
STANDARD TOLERANCE DESIGNATIONABEC NO.1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
FF-B-171/03J12D2EInterchangeable
interchangeable cross-reference
interchangeable
93L12Interchangeable
interchangeable cross-reference
interchangeable
104KSFFInterchangeable
interchangeable cross-reference
interchangeable
2010-411 ITEM 34SSInterchangeable
interchangeable cross-reference
interchangeable
A-A-59583Interchangeable
interchangeable cross-reference
interchangeable
771226Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy Z93L01LR1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Z93L01LR1?
Z93L01LR1 is a BEARING,BALL,ANNULAR.
What parts can replace Z93L01LR1?
There are 30 known substitutes for Z93L01LR1: FF-B-171/03J12D2E, 93L12, 104KSFF and 27 more. Substitute compatibility should be verified for your specific system.
What is the NSN for Z93L01LR1?
Z93L01LR1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-205-3473. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Z93L01LR1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026