PartsTable / COMPONENT / Z9385
Z9385
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: ASBESTOS OVERALL, outside_diameter: 2.000 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 1.031 INCHES MINIMUM AND 1.062 INCHES MAXIMUM IN, cross-sectional_thickness: 0.125 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-527-7831, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
Z9385
NSN: 5330-00-527-7831 FSC: 5330 CAGE: 13800 — PARKER-HANNIFIN CORPORATION (USA)
SPECIFICATIONS
material ASBESTOS OVERALL outside_diameter 2.000 INCHES NOMINAL IN style_designator CIRCULAR aperture_diameter 1.031 INCHES MINIMUM AND 1.062 INCHES MAXIMUM IN cross-sectional_thickness 0.125 INCHES NOMINAL IN cross-sectional_shape_style SOLID SINGLE OR COMPOSITION NSN 5330-00-527-7831
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: Z9385
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• OUTSIDE DIAMETER: 2.000 INCHES NOMINAL IN
• APERTURE DIAMETER: 1.031 INCHES MINIMUM AND 1.062 INCHES MAXIMUM IN
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
• STYLE DESIGNATOR: CIRCULAR
• MATERIAL: ASBESTOS OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER 2.000 INCHES NOMINAL IN APERTURE DIAMETER 1.031 INCHES MINIMUM AND 1.062 INCHES MAXIMUM IN CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION CROSS-SECTIONAL THICKNESS 0.125 INCHES NOMINAL IN STYLE DESIGNATOR CIRCULAR MATERIAL ASBESTOS OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
10111293 Interchangeable interchangeable cross-reference
interchangeable
5042 Interchangeable interchangeable cross-reference
interchangeable
9411244 Interchangeable interchangeable cross-reference
interchangeable
LP01L019 Interchangeable interchangeable cross-reference
interchangeable
MILE16366 Interchangeable interchangeable cross-reference
interchangeable
MIL-T-55156/1 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy Z9385?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Z9385?
Z9385 is a GASKET.
What parts can replace Z9385?
There are 15 known substitutes for Z9385: 10111293, 5042, 9411244 and 12 more. Substitute compatibility should be verified for your specific system.
Is Z9385 still available?
Z9385 is currently cancelled.