PartsTable
Technical Data Sheet
Download PDF

Z4408SS — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

Z4408SS: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OVERALL, nut_style: SLEEVE, nut_length: 0.500 INCHES NOMINAL IN, nut_diameter: 0.250 INCHES NOMINAL IN, thread_class: 2B, thread_length: 0.375 INCHES NOMINAL THREADS IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-631-4487, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Z4408SS
NSN: 5310-01-631-4487
FSC: 5310 — Nuts and Washers
CAGE: 4TU30 — ACCURATE MANUFACTURED PRODUCTS GROUP INC (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OVERALL
nut_styleSLEEVE
nut_length0.500 INCHES NOMINAL IN
nut_diameter0.250 INCHES NOMINAL IN
thread_class2B
thread_length0.375 INCHES NOMINAL THREADS IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
flange_diameter0.250 INCHES NOMINAL IN
flange_thickness0.125 INCHES NOMINAL IN
special_featuresINSERT DRIVE CROSS RECESSED
thread_directionRIGHT-HAND
nominal_thread_size0.190 INCHES IN
NSN5310-01-631-4487
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: Z4408SS · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 0.250 INCHES NOMINAL IN
•
NUT LENGTH: 0.500 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.125 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD LENGTH: 0.375 INCHES NOMINAL THREADS IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
NUT DIAMETER: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER0.250 INCHES NOMINAL IN
NUT LENGTH0.500 INCHES NOMINAL IN
FLANGE THICKNESS0.125 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD LENGTH0.375 INCHES NOMINAL THREADS IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
NUT DIAMETER0.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPEROUND OVERALL
SPECIAL FEATURESINSERT DRIVE CROSS RECESSED
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
99637A188Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy Z4408SS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Z4408SS?
Z4408SS is a NUT,SLEEVE.
What parts can replace Z4408SS?
There is 1 known substitute for Z4408SS: 99637A188. Substitute compatibility should be verified for your specific system.
What is the NSN for Z4408SS?
Z4408SS is cataloged in the U.S. Government catalog under NSN 5310-01-631-4487. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Z4408SS