PartsTable / COMPONENT / Z33S44383-605
Z33S44383-605
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING CASE, case_style: SQUARE, seal_width: 0.312 INCHES NOMINAL IN, surface_treatment: PASSIVATE CASE, housing_bore_diameter: 1.125 INCHES NOMINAL IN, sealing_element_style: ANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-261-1585, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
Z33S44383-605
NSN: 5330-00-261-1585 FSC: 5330 CAGE: 94135 — NAVAL ORDNANCE STANDARDS (USA)
SPECIFICATIONS
material STEEL CORROSION RESISTING CASE case_style SQUARE seal_width 0.312 INCHES NOMINAL IN surface_treatment PASSIVATE CASE housing_bore_diameter 1.125 INCHES NOMINAL IN sealing_element_style ANGULAR accommodated_shaft_diameter 0.500 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 3000 FEET PER MINUTE FT NSN 5330-00-261-1585
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: Z33S44383-605
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEAL WIDTH: 0.312 INCHES NOMINAL IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3000 FEET PER MINUTE FT
• MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
• SURFACE TREATMENT: PASSIVATE CASE
• ACCOMMODATED SHAFT DIAMETER: 0.500 INCHES NOMINAL IN
• SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH 0.312 INCHES NOMINAL IN ACCOMMODATED SHAFT MAXIMUM RATED SPEED 3000 FEET PER MINUTE FT MATERIAL RUBBER SYNTHETIC SEALING ELEMENT MATERIAL STEEL CORROSION RESISTING CASE SURFACE TREATMENT PASSIVATE CASE ACCOMMODATED SHAFT DIAMETER 0.500 INCHES NOMINAL IN CASE STYLE SQUARE SEALING ELEMENT STYLE ANGULAR HOUSING BORE DIAMETER 1.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
11555 Interchangeable interchangeable cross-reference
interchangeable
63X51 Interchangeable interchangeable cross-reference
interchangeable
00044 Interchangeable Same NIIN cross-reference
interchangeable
21475-0051 Interchangeable Same NIIN cross-reference
interchangeable
21890-0051 Interchangeable Same NIIN cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy Z33S44383-605?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Z33S44383-605?
Z33S44383-605 is a SEAL,PLAIN ENCASED.
What parts can replace Z33S44383-605?
There are 5 known substitutes for Z33S44383-605: 11555, 63X51, 00044 and 2 more. Substitute compatibility should be verified for your specific system.
Is Z33S44383-605 still available?
Z33S44383-605 is currently cancelled.
Request a Quote — Z33S44383-605