PartsTable / COMPONENT / Z33A37-1240
Z33A37-1240
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include angle: 90.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM, material: ALUMINUM ALLOY 6061 OR COPPER ALLOY OVERALL, surface_treatment: ANODIZE OVERALL, peripheral_diameter: 2.744 INCHES MINIMUM AND 2.748 INCHES MAXIMUM IN, center_hole_diameter: 2.127 INCHES MINIMUM AND 2.131 INCHES MAXIMUM IN, cross-sectional_height: 0.297 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-263-9955, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
Z33A37-1240
NSN: 5330-00-263-9955 FSC: 5330 CAGE: 94135 — NAVAL ORDNANCE STANDARDS (USA)
SPECIFICATIONS
angle 90.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM material ALUMINUM ALLOY 6061 OR COPPER ALLOY OVERALL surface_treatment ANODIZE OVERALL peripheral_diameter 2.744 INCHES MINIMUM AND 2.748 INCHES MAXIMUM IN center_hole_diameter 2.127 INCHES MINIMUM AND 2.131 INCHES MAXIMUM IN cross-sectional_height 0.297 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN cross-sectional_shape_style U material_document_and_classification QQ-A-225/8 FED SPEC 1ST MATERIAL RESPONSE OR WW-T-789 FED SPEC 1ST MATERIAL RESPONSE OVERALL surface_treatment_document_and_classification QQ-A-696 FED SPEC SINGLE TREATMENT RESPONSE OVERALL NSN 5330-00-263-9955
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: Z33A37-1240
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL HEIGHT: 0.297 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN
• CENTER HOLE DIAMETER: 2.127 INCHES MINIMUM AND 2.131 INCHES MAXIMUM IN
• MATERIAL: ALUMINUM ALLOY 6061 OR COPPER ALLOY OVERALL
• MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8 FED SPEC 1ST MATERIAL RESPONSE OR WW-T-789 FED SPEC 1ST MATERIAL RESPONSE OVERALL
• SURFACE TREATMENT: ANODIZE OVERALL
• PERIPHERAL DIAMETER: 2.744 INCHES MINIMUM AND 2.748 INCHES MAXIMUM IN
• ANGLE: 90.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM
• SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-A-696 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT 0.297 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN CENTER HOLE DIAMETER 2.127 INCHES MINIMUM AND 2.131 INCHES MAXIMUM IN MATERIAL ALUMINUM ALLOY 6061 OR COPPER ALLOY OVERALL MATERIAL DOCUMENT AND CLASSIFICATION QQ-A-225/8 FED SPEC 1ST MATERIAL RESPONSE OR WW-T-789 FED SPEC 1ST MATERIAL RESPONSE OVERALL SURFACE TREATMENT ANODIZE OVERALL PERIPHERAL DIAMETER 2.744 INCHES MINIMUM AND 2.748 INCHES MAXIMUM IN ANGLE 90.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM SURFACE TREATMENT DOCUMENT AND CLASSIFICATION QQ-A-696 FED SPEC SINGLE TREATMENT RESPONSE OVERALL CROSS-SECTIONAL SHAPE STYLE U
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
BU6-64C Interchangeable interchangeable cross-reference
interchangeable
100 Interchangeable interchangeable cross-reference
interchangeable
XX6-64C Interchangeable interchangeable cross-reference
interchangeable
0S0532 Interchangeable interchangeable cross-reference
interchangeable
00S532 Interchangeable interchangeable cross-reference
interchangeable
S532 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy Z33A37-1240?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Z33A37-1240?
Z33A37-1240 is a RETAINER,PACKING.
What parts can replace Z33A37-1240?
There are 9 known substitutes for Z33A37-1240: BU6-64C, 100, XX6-64C and 6 more. Substitute compatibility should be verified for your specific system.
Is Z33A37-1240 still available?
Z33A37-1240 is currently cancelled.
Request a Quote — Z33A37-1240