PartsTable
Technical Data Sheet
Download PDF

Z1836 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

Z1836: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: SLEEVE, nut_diameter: 0.8750 INCHES NOMINAL IN, thread_class: 2B, thread_length: 0.750 INCHES NOMINAL OVERALL IN, thread_series: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5310-01-733-9418, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Z1836
NSN: 5310-01-733-9418
FSC: 5310 — Nuts and Washers
CAGE: 4TU30 — ACCURATE MANUFACTURED PRODUCTS GROUP INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleSLEEVE
nut_diameter0.8750 INCHES NOMINAL IN
thread_class2B
thread_length0.750 INCHES NOMINAL OVERALL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
flange_diameter1.25 INCHES NOMINAL IN
flange_thickness0.375 INCHES NOMINAL IN
ledge_nut_length3.00 INCHES NOMINAL IN
special_featuresHEAD FASTENER ACCOMMODATE 0.3750 HEX KEY DRIVE
thread_directionRIGHT-HAND
nominal_thread_size0.6250 INCHES IN
NSN5310-01-733-9418
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: Z1836 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 1.25 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.375 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
LEDGE NUT LENGTH: 3.00 INCHES NOMINAL IN
•
THREAD LENGTH: 0.750 INCHES NOMINAL OVERALL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.6250 INCHES IN
•
NUT DIAMETER: 0.8750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER1.25 INCHES NOMINAL IN
FLANGE THICKNESS0.375 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
LEDGE NUT LENGTH3.00 INCHES NOMINAL IN
THREAD LENGTH0.750 INCHES NOMINAL OVERALL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.6250 INCHES IN
NUT DIAMETER0.8750 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPEROUND OVERALL
SPECIAL FEATURESHEAD FASTENER ACCOMMODATE 0.3750 HEX KEY DRIVE
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy Z1836?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Z1836?
Z1836 is a NUT,SLEEVE.
What is the NSN for Z1836?
Z1836 is cataloged in the U.S. Government catalog under NSN 5310-01-733-9418. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Z1836