PartsTable
Technical Data Sheet
Download PDF

Z104099524 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

Z104099524: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: HEXAGON, head_height: 0.096 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.000 INCHES NOMINAL IN, fastener_length: 1.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-143-6467, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Z104099524
NSN: 5305-01-143-6467
FSC: 5305 — Screws
CAGE: 24975 — PRESTOLITE ELECTRIC INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleHEXAGON
head_height0.096 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
thread_class2A A
thread_length1.000 INCHES NOMINAL IN
fastener_length1.000 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
width_between_flats0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
nominal_thread_diameter0.164 INCHES IN
thread_quantity_per_inch32
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-01-143-6467
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: Z104099524 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.096 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.000 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 1 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 1.000 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.096 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
FASTENER LENGTH1.000 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 1 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH1.000 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 2
2AG818Reference document
Same NSN cross-reference
Reference document — Secondary reference
99524Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy Z104099524?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Z104099524?
Z104099524 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace Z104099524?
There are 2 known substitutes for Z104099524: 2AG818, 99524. Substitute compatibility should be verified for your specific system.
What is the NSN for Z104099524?
Z104099524 is cataloged in the U.S. Government catalog under NSN 5305-01-143-6467. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Z104099524