PartsTable
Technical Data Sheet
PartsTable / COMPONENT / Z05777
Z05777 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, peripheral_diameter: 1.500 INCHES NOMINAL IN, center_hole_diameter: 1.188 INCHES NOMINAL IN, cross-sectional_height: 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-030-2638, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Z05777
NSN: 5330-01-030-2638
FSC: 5330
CAGE: 94533 — ACE HOSE REEL CO DEPT OF WILLIAM M WILSONS SONS INC (USA)
SPECIFICATIONS
materialRUBBER OVERALL
peripheral_diameter1.500 INCHES NOMINAL IN
center_hole_diameter1.188 INCHES NOMINAL IN
cross-sectional_height0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
cross-sectional_shape_styleU
NSN5330-01-030-2638
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: Z05777 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER OVERALL
•
PERIPHERAL DIAMETER: 1.500 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.188 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: U
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER OVERALL
PERIPHERAL DIAMETER1.500 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.188 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEU
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
5777Interchangeable
interchangeable cross-reference
interchangeable
551DMInterchangeable
interchangeable cross-reference
interchangeable
652946Interchangeable
interchangeable cross-reference
interchangeable
1802287Interchangeable
interchangeable cross-reference
interchangeable
9-632-100046Interchangeable
interchangeable cross-reference
interchangeable
A24013-10-27Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy Z05777?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Z05777?
Z05777 is a PACKING,PREFORMED.
What parts can replace Z05777?
There are 21 known substitutes for Z05777: 5777, 551DM, 652946 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for Z05777?
Z05777 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-030-2638. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Z05777

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026