PartsTable
Technical Data Sheet
PartsTable / O-RING / Z00.N7423061103
Z00.N7423061103 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The Z00.N7423061103 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-221-6178, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Z00.N7423061103
NSN: 5331-00-221-6178
FSC: 5331 — O-RING
CAGE: F0086 — DAHER AEROSPACE - EX SOCATA (FRA)
SPECIFICATIONS
Part NumberZ00.N7423061103
NSN5331-00-221-6178
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: Z00.N7423061103 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.429 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
MATERIAL: RUBBER SILICONE CLASS Q
•
TEMP RATING: -85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.429 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
MATERIALRUBBER SILICONE CLASS Q
TEMP RATING-85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
MS9385-05Interchangeable
interchangeable cross-reference
interchangeable
MS9385-06ESInterchangeable
interchangeable cross-reference
interchangeable
MS9385-06Interchangeable
interchangeable cross-reference
interchangeable
MS9385-11Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS9386Interchangeable
interchangeable cross-reference
interchangeable
MS9385-12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy Z00.N7423061103?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Z00.N7423061103?
Z00.N7423061103 is a Z00.N7423061103.
What parts can replace Z00.N7423061103?
There are 23 known substitutes for Z00.N7423061103: MS9385-05, MS9385-06ES, MS9385-06 and 20 more. Substitute compatibility should be verified for your specific system.
Is Z00.N7423061103 still available?
Z00.N7423061103 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Z00.N7423061103

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026