PartsTable
Technical Data Sheet
PartsTable / O-RING / Z00.N7423060907
Z00.N7423060907 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The Z00.N7423060907 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-171-5737, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Z00.N7423060907
NSN: 5331-00-171-5737
FSC: 5331 — O-RING
CAGE: F0086 — DAHER AEROSPACE - EX SOCATA (FRA)
SPECIFICATIONS
Part NumberZ00.N7423060907
NSN5331-00-171-5737
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: Z00.N7423060907 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 4.887 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 4.594 INCHES MINIMUM AND 4.624 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 150 MAXIMUM
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER4.887 INCHES NOMINAL IN
CENTER HOLE DIAMETER4.594 INCHES MINIMUM AND 4.624 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE150 MAXIMUM
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
9599010143Interchangeable
Same NIIN cross-reference
interchangeable
AS3570-247Interchangeable
Same NIIN cross-reference
interchangeable
SAE-AS3570Interchangeable
Same NIIN cross-reference
interchangeable
AN123907Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy Z00.N7423060907?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Z00.N7423060907?
Z00.N7423060907 is a Z00.N7423060907.
What parts can replace Z00.N7423060907?
There are 4 known substitutes for Z00.N7423060907: 9599010143, AS3570-247, SAE-AS3570 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for Z00.N7423060907?
Z00.N7423060907 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-171-5737. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Z00.N7423060907

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026