PartsTable
Technical Data Sheet
Download PDF

YTM1966-11 — BEARING,PLAIN,ROD END

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

YTM1966-11: BEARING,PLAIN,ROD END.

The BEARING,PLAIN,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OUTER RACE MEMBER, shank_style: EXTERNALLY THREADED, thread_class: 3A A, bore_diameter: 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, overall_length: 2.1210 INCHES MINIMUM AND 2.1860 INCHES MAXIMUM IN, thread_diameter: 0.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-761-5589, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
YTM1966-11
NSN: 3120-00-761-5589
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 77896 — REXNORD INDUSTRIES, LLC DIV AEROSSPACE BEARING OPERATION (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OUTER RACE MEMBER
shank_styleEXTERNALLY THREADED
thread_class3A A
bore_diameter0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
overall_length2.1210 INCHES MINIMUM AND 2.1860 INCHES MAXIMUM IN
thread_diameter0.375 INCHES NOMINAL IN
special_featuresNO RADIAL CLEARANCE BETWEEN BALL AND OUTER RACE
style_designatorBALL TYPE
thread_directionLEFT-HAND
surface_treatmentCADMIUM ROD END BODY
inner_member_width0.4250 INCHES MINIMUM AND 0.4300 INCHES MAXIMUM IN
outer_member_width0.3020 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
NSN3120-00-761-5589
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: YTM1966-11 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK THREAD LENGTH: 0.9900 INCHES MINIMUM AND 1.0100 INCHES MAXIMUM IN
•
BORE CENTER TO SHANK END DISTANCE: 1.7200 INCHES MINIMUM AND 1.7800 INCHES MAXIMUM IN
•
INNER MEMBER WIDTH: 0.4250 INCHES MINIMUM AND 0.4300 INCHES MAXIMUM IN
•
OUTER MEMBER WIDTH: 0.3020 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: BALL TYPE
•
THREAD DIAMETER: 0.375 INCHES NOMINAL IN
•
THREAD DIRECTION: LEFT-HAND
TECHNICAL CHARACTERISTICS
SHANK THREAD LENGTH0.9900 INCHES MINIMUM AND 1.0100 INCHES MAXIMUM IN
BORE CENTER TO SHANK END DISTANCE1.7200 INCHES MINIMUM AND 1.7800 INCHES MAXIMUM IN
INNER MEMBER WIDTH0.4250 INCHES MINIMUM AND 0.4300 INCHES MAXIMUM IN
OUTER MEMBER WIDTH0.3020 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
STYLE DESIGNATORBALL TYPE
THREAD DIAMETER0.375 INCHES NOMINAL IN
OVERALL LENGTH2.1210 INCHES MINIMUM AND 2.1860 INCHES MAXIMUM IN
THREAD DIRECTIONLEFT-HAND
SHANK STYLEEXTERNALLY THREADED
SPECIAL FEATURESNO RADIAL CLEARANCE BETWEEN BALL AND OUTER RACE
SUBSTITUTES & CROSS-REFERENCES 5
149112-02Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
209-001-053-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
YTM196L11Reference document
Same NSN cross-reference
Reference document — Secondary reference
177207Reference document
Same NSN cross-reference
Reference document — Secondary reference
149112-01Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy YTM1966-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is YTM1966-11?
YTM1966-11 is a BEARING,PLAIN,ROD END.
What parts can replace YTM1966-11?
There are 5 known substitutes for YTM1966-11: 149112-02, 209-001-053-1, YTM196L11 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for YTM1966-11?
YTM1966-11 is cataloged in the U.S. Government catalog under NSN 3120-00-761-5589. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — YTM1966-11