PartsTable
Technical Data Sheet
Download PDF

YTF140 — BEARING,PLAIN,ROD END

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

YTF140: BEARING,PLAIN,ROD END.

The BEARING,PLAIN,ROD END is a the manufacturer industrial component. Key specifications include shank_style: INTERNALLY THREADED W/BEAD AND WRENCH FLATS AND INSPECTION HOLE, thread_class: 3B, bore_diameter: 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, overall_length: 2.9935 INCHES NOMINAL IN, special_features: FOUR LOCKWASHER SLOTS IN END OF ROD END SHANK; PASSIVATION ON INNER RACE MEMBER IS OPTIONAL, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-135-0140, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
YTF140
NSN: 3120-01-135-0140
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 77896 — REXNORD INDUSTRIES, LLC DIV AEROSSPACE BEARING OPERATION (USA)
SPECIFICATIONS
shank_styleINTERNALLY THREADED W/BEAD AND WRENCH FLATS AND INSPECTION HOLE
thread_class3B
bore_diameter0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
overall_length2.9935 INCHES NOMINAL IN
special_featuresFOUR LOCKWASHER SLOTS IN END OF ROD END SHANK; PASSIVATION ON INNER RACE MEMBER IS OPTIONAL
thread_directionRIGHT-HAND
inner_member_width0.3410 INCHES MINIMUM AND 0.3430 INCHES MAXIMUM IN
outer_member_width0.2550 INCHES MINIMUM AND 0.2650 INCHES MAXIMUM IN
shank_thread_length0.6250 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
static_radial_load_rating5500 POUNDS LBS
outer_member_outside_diameter0.8270 INCHES NOMINAL IN
shank_width_across_wrench_flats0.3290 INCHES NOMINAL IN
NSN3120-01-135-0140
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: YTF140 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK THREAD LENGTH: 0.6250 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
•
BORE CENTER TO SHANK END DISTANCE: 2.5800 INCHES NOMINAL IN
•
INNER MEMBER WIDTH: 0.3410 INCHES MINIMUM AND 0.3430 INCHES MAXIMUM IN
•
OUTER MEMBER WIDTH: 0.2550 INCHES MINIMUM AND 0.2650 INCHES MAXIMUM IN
•
SHANK WIDTH ACROSS WRENCH FLATS: 0.3290 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
SHANK STYLE: INTERNALLY THREADED W/BEAD AND WRENCH FLATS AND INSPECTION HOLE
TECHNICAL CHARACTERISTICS
SHANK THREAD LENGTH0.6250 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
BORE CENTER TO SHANK END DISTANCE2.5800 INCHES NOMINAL IN
INNER MEMBER WIDTH0.3410 INCHES MINIMUM AND 0.3430 INCHES MAXIMUM IN
OUTER MEMBER WIDTH0.2550 INCHES MINIMUM AND 0.2650 INCHES MAXIMUM IN
OVERALL LENGTH2.9935 INCHES NOMINAL IN
SHANK WIDTH ACROSS WRENCH FLATS0.3290 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
SHANK STYLEINTERNALLY THREADED W/BEAD AND WRENCH FLATS AND INSPECTION HOLE
SPECIAL FEATURESFOUR LOCKWASHER SLOTS IN END OF ROD END SHANK; PASSIVATION ON INNER RACE MEMBER IS OPTIONAL
THREAD CLASS3B
SUBSTITUTES & CROSS-REFERENCES 4
ADN4-308Reference document
Same NSN cross-reference
Reference document — Secondary reference
ST4M210-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10108066Reference document
Same NSN cross-reference
Reference document — Informative reference only
KBD4-74Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy YTF140?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is YTF140?
YTF140 is a BEARING,PLAIN,ROD END.
What parts can replace YTF140?
There are 4 known substitutes for YTF140: ADN4-308, ST4M210-4, 10108066 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for YTF140?
YTF140 is cataloged in the U.S. Government catalog under NSN 3120-01-135-0140. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — YTF140