PartsTable
Technical Data Sheet
Download PDF

YS180 — BEARING,ROLLER,ROD END

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

YS180: BEARING,ROLLER,ROD END.

The BEARING,ROLLER,ROD END is a the manufacturer industrial component. Key specifications include thread_class: 3A A, bore_diameter: 0.2500 INCHES NOMINAL IN, alignment_type: SELF-ALIGNING, thread_direction: RIGHT-HAND, bearing_seal_type: CONTACT, nominal_thread_size: 0.375 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-013-1390, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
YS180
NSN: 3110-00-013-1390
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 77896 — REXNORD INDUSTRIES, LLC DIV AEROSSPACE BEARING OPERATION (USA)
SPECIFICATIONS
thread_class3A A
bore_diameter0.2500 INCHES NOMINAL IN
seal_quantity2
alignment_typeSELF-ALIGNING
thread_directionRIGHT-HAND
bearing_seal_typeCONTACT
nominal_thread_size0.375 INCHES IN
shank_thread_length1.1200 INCHES MINIMUM IN
lubrication_materialGREASE
self-alignment_angle10.00 DEGREES NOMINAL
self-alignment_locationINTERNAL
thread_quantity_per_inch24
NSN3110-00-013-1390
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: YS180 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK THREAD LENGTH: 1.1200 INCHES MINIMUM IN
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
SELF-ALIGNMENT ANGLE: 10.00 DEGREES NOMINAL
•
ALIGNMENT TYPE: SELF-ALIGNING
•
SEAL QUANTITY: 2
TECHNICAL CHARACTERISTICS
SHANK THREAD LENGTH1.1200 INCHES MINIMUM IN
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
SELF-ALIGNMENT ANGLE10.00 DEGREES NOMINAL
ALIGNMENT TYPESELF-ALIGNING
SEAL QUANTITY2
THREAD CLASS3A A
THREAD QUANTITY PER INCH24
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
107CS016-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy YS180?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is YS180?
YS180 is a BEARING,ROLLER,ROD END.
What parts can replace YS180?
There is 1 known substitute for YS180: 107CS016-2. Substitute compatibility should be verified for your specific system.
What is the NSN for YS180?
YS180 is cataloged in the U.S. Government catalog under NSN 3110-00-013-1390. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — YS180