PartsTable
Technical Data Sheet
Download PDF

Y96PWICRDBTD233S8 — BEARING,BALL,DUPLEX

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

Y96PWICRDBTD233S8: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OUTER RING, bore_diameter: 5.9990 INCHES MINIMUM AND 6.0000 INCHES MAXIMUM IN, overall_width: 1.2300 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND, special_features: EXPOSED SURFACES CADMIUM PLATED. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-253-4717, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Y96PWICRDBTD233S8
NSN: 3110-00-253-4717
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OUTER RING
bore_diameter5.9990 INCHES MINIMUM AND 6.0000 INCHES MAXIMUM IN
overall_width1.2300 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
special_featuresEXPOSED SURFACES CADMIUM PLATED
style_designatorNON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING
bearing_seal_typeCONTACT
features_providedALIGNING RING
end_item_identificationAIRCRAFT CARGO WINCH
overall_outside_diameter7.1240 INCHES MINIMUM AND 7.1250 INCHES MAXIMUM IN
NSN3110-00-253-4717
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: Y96PWICRDBTD233S8 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: CONTACT
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING
•
OVERALL OUTSIDE DIAMETER: 7.1240 INCHES MINIMUM AND 7.1250 INCHES MAXIMUM IN
•
FEATURES PROVIDED: ALIGNING RING
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS
BEARING SEAL TYPECONTACT
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING
OVERALL WIDTH1.2300 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER7.1240 INCHES MINIMUM AND 7.1250 INCHES MAXIMUM IN
FEATURES PROVIDEDALIGNING RING
LOAD DIRECTIONRADIAL
SPECIAL FEATURESEXPOSED SURFACES CADMIUM PLATED
SEAL QUANTITY2
END ITEM IDENTIFICATIONAIRCRAFT CARGO WINCH
SUBSTITUTES & CROSS-REFERENCES 2
42132D150Reference document
Same NSN cross-reference
Reference document — Secondary reference
Y96PWICRDBReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy Y96PWICRDBTD233S8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Y96PWICRDBTD233S8?
Y96PWICRDBTD233S8 is a BEARING,BALL,DUPLEX.
What parts can replace Y96PWICRDBTD233S8?
There are 2 known substitutes for Y96PWICRDBTD233S8: 42132D150, Y96PWICRDB. Substitute compatibility should be verified for your specific system.
What is the NSN for Y96PWICRDBTD233S8?
Y96PWICRDBTD233S8 is cataloged in the U.S. Government catalog under NSN 3110-00-253-4717. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Y96PWICRDBTD233S8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.