PartsTable
Technical Data Sheet
PartsTable / COMPONENT / Y30-13
Y30-13 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CRANK,HAND is a the manufacturer industrial component. Key specifications include ratchet: NOT INCLUDED, material: STEEL OVERALL, arm_style: COUNTER BALANCED, arm_length: 4.625 INCHES NOMINAL IN, drive_width: 0.875 INCHES NOMINAL IN, shank_height: 0.938 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-706-4462, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Y30-13
NSN: 5340-00-706-4462
FSC: 5340
CAGE: 45225 — BOSCH AUTOMOTIVE SERVICE SOLUTIONS INC. (USA)
SPECIFICATIONS
ratchetNOT INCLUDED
materialSTEEL OVERALL
arm_styleCOUNTER BALANCED
arm_length4.625 INCHES NOMINAL IN
drive_width0.875 INCHES NOMINAL IN
shank_height0.938 INCHES NOMINAL IN
drive_end_styleEXTERNAL
special_featuresSURFACE TREATMENT AND LOCATION: ALUMINUM OVERALL
surface_treatmentALUMINUM OVERALL
crank_throw_length2.500 INCHES NOMINAL IN
crank_overall_length6.000 INCHES NOMINAL IN
drive_facility_styleSQUARE WITH DIAGONAL CORNER
NSN5340-00-706-4462
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: Y30-13 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DRIVE WIDTH: 0.875 INCHES NOMINAL IN
•
RATCHET: NOT INCLUDED
•
MATERIAL: STEEL OVERALL
•
HANDLE ROTATING FEATURE: NOT INCLUDED
•
DRIVE FACILITY STYLE: SQUARE WITH DIAGONAL CORNER
•
SHANK HEIGHT: 0.938 INCHES NOMINAL IN
•
ARM LENGTH: 4.625 INCHES NOMINAL IN
•
ARM STYLE: COUNTER BALANCED
TECHNICAL CHARACTERISTICS (FLIS)
DRIVE WIDTH0.875 INCHES NOMINAL IN
RATCHETNOT INCLUDED
MATERIALSTEEL OVERALL
HANDLE ROTATING FEATURENOT INCLUDED
DRIVE FACILITY STYLESQUARE WITH DIAGONAL CORNER
SHANK HEIGHT0.938 INCHES NOMINAL IN
ARM LENGTH4.625 INCHES NOMINAL IN
ARM STYLECOUNTER BALANCED
SPECIAL FEATURESSURFACE TREATMENT AND LOCATION: ALUMINUM OVERALL
CRANK THROW LENGTH2.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
T59014Interchangeable
interchangeable cross-reference
interchangeable
2-214-N574-70Interchangeable
interchangeable cross-reference
interchangeable
2285AAInterchangeable
interchangeable cross-reference
interchangeable
27198Interchangeable
interchangeable cross-reference
interchangeable
20-27035 ITEM 1Interchangeable
interchangeable cross-reference
interchangeable
20-27035Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy Y30-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Y30-13?
Y30-13 is a CRANK,HAND.
What parts can replace Y30-13?
There are 6 known substitutes for Y30-13: T59014, 2-214-N574-70, 2285AA and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for Y30-13?
Y30-13 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-706-4462. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Y30-13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026