PartsTable
Technical Data Sheet
Download PDF

Y232098 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

Y232098: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q OVERALL, temp_rating: 450.0 FAHRENHEIT DEGF, overall_width: 13.656 INCHES MINIMUM AND 13.844 INCHES MAXIMUM IN, aperture_width: 12.656 INCHES MINIMUM AND 12.844 INCHES MAXIMUM IN, overall_length: 13.656 INCHES MINIMUM AND 13.844 INCHES MAXIMUM IN, aperture_length: 12.656 INCHES MINIMUM AND 12.844 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-406-5224, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Y232098
NSN: 5330-00-406-5224
FSC: 5330 — Packing and Gasket Materials
CAGE: 48619 — PRECISION SCIENTIFIC PETROLEUM INSTRUMENTS CO (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q OVERALL
temp_rating450.0 FAHRENHEIT DEGF
overall_width13.656 INCHES MINIMUM AND 13.844 INCHES MAXIMUM IN
aperture_width12.656 INCHES MINIMUM AND 12.844 INCHES MAXIMUM IN
overall_length13.656 INCHES MINIMUM AND 13.844 INCHES MAXIMUM IN
aperture_length12.656 INCHES MINIMUM AND 12.844 INCHES MAXIMUM IN
hardness_rating55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
outside_corner_radius0.312 INCHES NOMINAL IN
cross-sectional_thickness0.271 INCHES MINIMUM AND 0.301 INCHES MAXIMUM IN
material_document_and_classificationC-115,FSCM 78046 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-406-5224
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: Y232098 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: 450.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL THICKNESS: 0.271 INCHES MINIMUM AND 0.301 INCHES MAXIMUM IN
•
HARDNESS RATING: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: C-115,FSCM 78046 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
APERTURE WIDTH: 12.656 INCHES MINIMUM AND 12.844 INCHES MAXIMUM IN
•
APERTURE LENGTH: 12.656 INCHES MINIMUM AND 12.844 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
TEMP RATING450.0 FAHRENHEIT DEGF
CROSS-SECTIONAL THICKNESS0.271 INCHES MINIMUM AND 0.301 INCHES MAXIMUM IN
HARDNESS RATING55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONC-115,FSCM 78046 MFR REF SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH13.656 INCHES MINIMUM AND 13.844 INCHES MAXIMUM IN
OVERALL WIDTH13.656 INCHES MINIMUM AND 13.844 INCHES MAXIMUM IN
APERTURE WIDTH12.656 INCHES MINIMUM AND 12.844 INCHES MAXIMUM IN
APERTURE LENGTH12.656 INCHES MINIMUM AND 12.844 INCHES MAXIMUM IN
OUTSIDE CORNER RADIUS0.312 INCHES NOMINAL IN
MATERIALRUBBER SILICONE CLASS Q OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy Y232098?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Y232098?
Y232098 is a GASKET.
What is the NSN for Y232098?
Y232098 is cataloged in the U.S. Government catalog under NSN 5330-00-406-5224. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Y232098

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.