PartsTable
Technical Data Sheet
Download PDF

Y219 — DIE,CRIMPING TOOL

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

Y219: DIE,CRIMPING TOOL.

The DIE,CRIMPING TOOL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.875 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-270-2588, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Y219
NSN: 5310-00-270-2588
NIINs: 002702588, 013007282, 013619351
FSC: 5310 — Nuts and Washers
CAGE: 30760 — INGERSOLL RAND CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.875 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
width_across_flats1.438 INCHES NOMINAL IN
nominal_thread_size0.875 INCHES IN
bearing_surface_typeFLAT OR WASHER FACED
end_item_identificationDANIELS MFG CORP. HX4 CRIMP TOOL
thread_quantity_per_inch9
general_characteristics_item_descriptionTRIPLE DIE CLOSURE; 0.213 X 0.400 IN., 0.160 X 0.400 IN., AND 0.128 X 0.400 IN. IN
NSN5310-00-270-2588
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: Y219 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.438 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.875 INCHES IN
•
NUT HEIGHT: 0.875 INCHES NOMINAL IN
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
•
THREAD QUANTITY PER INCH: 9
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.438 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.875 INCHES IN
NUT HEIGHT0.875 INCHES NOMINAL IN
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH9
MATERIALSTEEL OVERALL
BEARING SURFACE TYPEFLAT OR WASHER FACED
SUBSTITUTES & CROSS-REFERENCES 1
X1060T4Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy Y219?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Y219?
Y219 is a DIE,CRIMPING TOOL.
What parts can replace Y219?
There is 1 known substitute for Y219: X1060T4. Substitute compatibility should be verified for your specific system.
What is the NSN for Y219?
Y219 is cataloged in the U.S. Government catalog under NSN 5310-00-270-2588. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Y219

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.