PartsTable
Technical Data Sheet
PartsTable / COMPONENT / Y1005-8-2
Y1005-8-2 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, nut_style: CLINCH, nut_height: 0.188 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), pilot_diameter: 0.212 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-980-6155, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Y1005-8-2
NSN: 5310-00-980-6155
FSC: 5310
CAGE: 08484 — BREEZE-EASTERN LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
nut_styleCLINCH
nut_height0.188 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.212 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.250 INCHES NOMINAL IN
nominal_thread_size0.138 INCHES IN
thread_quantity_per_inch32
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-980-6155
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: Y1005-8-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL COMP 303 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
PILOT DIAMETER: 0.212 INCHES MAXIMUM IN
•
NUT HEIGHT: 0.188 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 32
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
NOMINAL THREAD SIZE: 0.138 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
PILOT DIAMETER0.212 INCHES MAXIMUM IN
NUT HEIGHT0.188 INCHES NOMINAL IN
THREAD QUANTITY PER INCH32
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
NOMINAL THREAD SIZE0.138 INCHES IN
THREAD DIRECTIONRIGHT-HAND
WIDTH ACROSS FLATS0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
1004-44Interchangeable
interchangeable cross-reference
interchangeable
D.P.5632Interchangeable
interchangeable cross-reference
interchangeable
1049-02Interchangeable
interchangeable cross-reference
interchangeable
50389-330Interchangeable
interchangeable cross-reference
interchangeable
10291-JACKInterchangeable
interchangeable cross-reference
interchangeable
5800332-9002-032Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy Y1005-8-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Y1005-8-2?
Y1005-8-2 is a NUT,PLAIN,CLINCH.
What parts can replace Y1005-8-2?
There are 7 known substitutes for Y1005-8-2: 1004-44, D.P.5632, 1049-02 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for Y1005-8-2?
Y1005-8-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-980-6155. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Y1005-8-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026