PartsTable
Technical Data Sheet
PartsTable / COMPONENT / XX51075K1110
XX51075K1110 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUTTON,PLUG is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010, head_height: 0.210 INCHES NOMINAL IN, overall_height: 1.340 INCHES NOMINAL IN, style_designator: DEEP SPRING CLIP, surface_treatment: NICKEL, head_outside_diameter: 1.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-434-4683, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
XX51075K1110
NSN: 5340-00-434-4683
FSC: 5340
CAGE: 83058 — TRW ASSEMBLIES AND FASTENERS GROUP FASTENERS DIV (USA)
SPECIFICATIONS
materialSTEEL COMP 1010
head_height0.210 INCHES NOMINAL IN
overall_height1.340 INCHES NOMINAL IN
style_designatorDEEP SPRING CLIP
surface_treatmentNICKEL
head_outside_diameter1.000 INCHES NOMINAL IN
material_document_and_classificationSAE 1010 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-434-4683
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: XX51075K1110 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: DEEP SPRING CLIP
•
HEAD OUTSIDE DIAMETER: 1.000 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE 1010 ASSN STD SINGLE MATERIAL RESPONSE
•
SURFACE TREATMENT: NICKEL
•
HEAD HEIGHT: 0.210 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1010
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORDEEP SPRING CLIP
HEAD OUTSIDE DIAMETER1.000 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE 1010 ASSN STD SINGLE MATERIAL RESPONSE
SURFACE TREATMENTNICKEL
HEAD HEIGHT0.210 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010
OVERALL HEIGHT1.340 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
100070Interchangeable
interchangeable cross-reference
interchangeable
100070-1Interchangeable
interchangeable cross-reference
interchangeable
RB1-120Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy XX51075K1110?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is XX51075K1110?
XX51075K1110 is a BUTTON,PLUG.
What parts can replace XX51075K1110?
There are 3 known substitutes for XX51075K1110: 100070, 100070-1, RB1-120. Substitute compatibility should be verified for your specific system.
What is the NSN for XX51075K1110?
XX51075K1110 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-434-4683. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — XX51075K1110

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026