PartsTable
Technical Data Sheet
PartsTable / COMPONENT / XX-M TYPE T TRIM
XX-M TYPE T TRIM ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The LOCK SET,MORTISE is a the manufacturer industrial component. Key specifications include diameter: 1.000 INCHES NOMINAL IN, material: COPPER ALLOY BAR, special_features: SUPPORTING ESCUTCHEON PLATE HEIGHT:16.000 IN.;SUPPORTING ESCUTCHEON PLATE WIDTH:2.625 IN, IN, locking_mechanism_type: TURN KEY. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-247-9646, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
XX-M TYPE T TRIM
NSN: 5340-01-247-9646
FSC: 5340
CAGE: 48111 — SHAMROCK SUPPLY CO (USA)
SPECIFICATIONS
diameter1.000 INCHES NOMINAL IN
materialCOPPER ALLOY BAR
special_featuresSUPPORTING ESCUTCHEON PLATE HEIGHT:16.000 IN.;SUPPORTING ESCUTCHEON PLATE WIDTH:2.625 IN, IN
locking_mechanism_typeTURN KEY
NSN5340-01-247-9646
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: XX-M TYPE T TRIM MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 1.000 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY BAR
•
LOCKING MECHANISM TYPE: TURN KEY
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER1.000 INCHES NOMINAL IN
MATERIALCOPPER ALLOY BAR
SPECIAL FEATURESSUPPORTING ESCUTCHEON PLATE HEIGHT:16.000 IN.;SUPPORTING ESCUTCHEON PLATE WIDTH:2.625 IN, IN
LOCKING MECHANISM TYPETURN KEY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
NON24-326Upgraded Successor
successor cross-reference
successor
VR115Upgraded Successor
successor cross-reference
successor
305-00Upgraded Successor
successor cross-reference
successor
305Upgraded Successor
successor cross-reference
successor
305-00VMUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy XX-M TYPE T TRIM?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is XX-M TYPE T TRIM?
XX-M TYPE T TRIM is a LOCK SET,MORTISE.
What parts can replace XX-M TYPE T TRIM?
There are 5 known substitutes for XX-M TYPE T TRIM: NON24-326, VR115, 305-00 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for XX-M TYPE T TRIM?
XX-M TYPE T TRIM is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-247-9646. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — XX-M TYPE T TRIM

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026