PartsTable
Technical Data Sheet
Download PDF

XW9 — BEARING,BALL,THRUST

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

XW9: BEARING,BALL,THRUST.

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL WASHER, alignment_type: RIGID, overall_height: 1.8700 INCHES MINIMUM AND 1.8800 INCHES MAXIMUM IN, surface_finish: GROUND, style_designator: GROOVED RACE SURFACE, bore_smallest_diameter: 9.0040 INCHES MINIMUM AND 9.0060 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-277-0180, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
XW9
NSN: 3110-00-277-0180
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL WASHER
alignment_typeRIGID
overall_height1.8700 INCHES MINIMUM AND 1.8800 INCHES MAXIMUM IN
surface_finishGROUND
style_designatorGROOVED RACE SURFACE
bore_smallest_diameter9.0040 INCHES MINIMUM AND 9.0060 INCHES MAXIMUM IN
overall_outside_diameter11.2480 INCHES MINIMUM AND 11.2500 INCHES MAXIMUM IN
thrust_directional_capability_designationSINGLE
NSN3110-00-277-0180
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: XW9 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: GROOVED RACE SURFACE
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 11.2480 INCHES MINIMUM AND 11.2500 INCHES MAXIMUM IN
•
BORE SMALLEST DIAMETER: 9.0040 INCHES MINIMUM AND 9.0060 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
•
MATERIAL: STEEL BALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.8700 INCHES MINIMUM AND 1.8800 INCHES MAXIMUM IN
SURFACE FINISHGROUND
STYLE DESIGNATORGROOVED RACE SURFACE
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER11.2480 INCHES MINIMUM AND 11.2500 INCHES MAXIMUM IN
BORE SMALLEST DIAMETER9.0040 INCHES MINIMUM AND 9.0060 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
MATERIALSTEEL BALL
MATERIALSTEEL WASHER
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy XW9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is XW9?
XW9 is a BEARING,BALL,THRUST.
What is the NSN for XW9?
XW9 is cataloged in the U.S. Government catalog under NSN 3110-00-277-0180. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — XW9