PartsTable
Technical Data Sheet
Download PDF

XTR-C0974-2E — SEAL,NONMETALLIC SPECIAL SHAPED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

XTR-C0974-2E: SEAL,NONMETALLIC SPECIAL SHAPED.

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include material: RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM OVERALL, style_designator: STRIP, end_item_identification: 2320-01-549-8565, cross-sectional_shape_style: SPECIAL, material_document_and_classification: SAE J18 ASSN STD SINGLE MATERIAL RESPONSE OVERALL, part_name_assigned_by_controlling_agency: SEAL,TRIM,DOOR. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-574-9259, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
XTR-C0974-2E
NSN: 5330-01-574-9259
FSC: 5330 — Packing and Gasket Materials
CAGE: 0VXY8 — GREN INDUSTRIES INC DBA SERVICE RUBBER GROUP DIV SERVICE RUBBER GROUP (USA)
SPECIFICATIONS
materialRUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM OVERALL
style_designatorSTRIP
end_item_identification2320-01-549-8565
cross-sectional_shape_styleSPECIAL
material_document_and_classificationSAE J18 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencySEAL,TRIM,DOOR
NSN5330-01-574-9259
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: XTR-C0974-2E MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: STRIP
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J18 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSTRIP
MATERIAL DOCUMENT AND CLASSIFICATIONSAE J18 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESPECIAL
PART NAME ASSIGNED BY CONTROLLING AGENCYSEAL,TRIM,DOOR
END ITEM IDENTIFICATION2320-01-549-8565
MATERIALRUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
12506002Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
12506002-001Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy XTR-C0974-2E?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is XTR-C0974-2E?
XTR-C0974-2E is a SEAL,NONMETALLIC SPECIAL SHAPED.
What parts can replace XTR-C0974-2E?
There are 2 known substitutes for XTR-C0974-2E: 12506002, 12506002-001. Substitute compatibility should be verified for your specific system.
What is the NSN for XTR-C0974-2E?
XTR-C0974-2E is cataloged in the U.S. Government catalog under NSN 5330-01-574-9259. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — XTR-C0974-2E