PartsTable
Technical Data Sheet
Download PDF

XM61730 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

XM61730: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hole_diameter: 0.430 INCHES MINIMUM AND 1.000 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, style_designator: ISOSCELES TRIANGLE, outside_corner_radius: 0.560 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN, cross-sectional_thickness: 0.060 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-080-3255, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
XM61730
NSN: 5330-01-080-3255
FSC: 5330 — Packing and Gasket Materials
CAGE: 01417 — GENERAL DYNAMICS LAND SYSTEMS INC. (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hole_diameter0.430 INCHES MINIMUM AND 1.000 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
style_designatorISOSCELES TRIANGLE
outside_corner_radius0.560 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN
cross-sectional_thickness0.060 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
bolt_hole_centerline_to_nearest_edge_distance0.340 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width3.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length2.470 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-01-080-3255
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: XM61730 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.060 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ISOSCELES TRIANGLE
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE: 0.340 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 2.470 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 3.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE CORNER RADIUS: 0.560 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.060 INCHES NOMINAL IN
STYLE DESIGNATORISOSCELES TRIANGLE
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE0.340 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH2.470 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH3.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE CORNER RADIUS0.560 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC OVERALL
HOLE DIAMETER0.430 INCHES MINIMUM AND 1.000 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
12281842Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy XM61730?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is XM61730?
XM61730 is a GASKET.
What parts can replace XM61730?
There is 1 known substitute for XM61730: 12281842. Substitute compatibility should be verified for your specific system.
What is the NSN for XM61730?
XM61730 is cataloged in the U.S. Government catalog under NSN 5330-01-080-3255. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — XM61730

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.