PartsTable
Technical Data Sheet
PartsTable / COMPONENT / XLS5 1-2
XLS5 1-2 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 5.5000 INCHES NOMINAL IN, overall_width: 1.0000 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-9002, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
XLS5 1-2
NSN: 3110-00-155-9002
FSC: 3110
CAGE: 61220 — TYSON BEARING CO DIV SKF INDUSTRIES INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter5.5000 INCHES NOMINAL IN
overall_width1.0000 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter7.5000 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
nondefinitive_spec/std_data115 TYPE AND 00 GRADE
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-155-9002
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: XLS5 1-2 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
NONDEFINITIVE SPEC/STD DATA: 115 TYPE AND 00 GRADE
•
BORE SHAPE: STRAIGHT
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
NONDEFINITIVE SPEC/STD DATA115 TYPE AND 00 GRADE
BORE SHAPESTRAIGHT
STANDARD TOLERANCE DESIGNATIONABEC NO.1
MATERIALSTEEL OVERALL
NONDEFINITIVE SPEC/STD DATA115 TYPE AND 00 GRADE
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
MS15571-2Interchangeable
interchangeable cross-reference
interchangeable
44Interchangeable
interchangeable cross-reference
interchangeable
GE44Interchangeable
interchangeable cross-reference
interchangeable
L44Interchangeable
interchangeable cross-reference
interchangeable
99212Interchangeable
interchangeable cross-reference
interchangeable
D212Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy XLS5 1-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is XLS5 1-2?
XLS5 1-2 is a BEARING,BALL,ANNULAR.
What parts can replace XLS5 1-2?
There are 24 known substitutes for XLS5 1-2: MS15571-2, 44, GE44 and 21 more. Substitute compatibility should be verified for your specific system.
Is XLS5 1-2 still available?
XLS5 1-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — XLS5 1-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026