PartsTable
Technical Data Sheet
PartsTable / COMPONENT / XLS5
XLS5 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_shape: STRAIGHT, bore_diameter: 5.0000 INCHES NOMINAL IN, overall_width: 1.0000 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-109-1571, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
XLS5
NSN: 3110-00-109-1571
FSC: 3110
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_shapeSTRAIGHT
bore_diameter5.0000 INCHES NOMINAL IN
overall_width1.0000 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
end_item_identificationUSED ON AHURA FIRST DEFENDER CHEMICAL IDENTIFICATION SYSTEM
overall_outside_diameter7.0000 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.1
general_characteristics_item_descriptionATTACHES TO LASER APERTURE ON HAND HELD INSTRUMENT; CABLE LGTH 1 METER; FIBER OPTIC EXTENSION PROBE; RUGGEDIZED; PLUG AND PLAY; POINT AND SHOOT FOR HARD TO REACH AREAS
NSN3110-00-109-1571
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: XLS5 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
MATERIAL: STEEL INNER RING
•
BORE SHAPE: STRAIGHT
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.1
MATERIALSTEEL INNER RING
MATERIALPLASTIC PHENOLIC RETAINER
MATERIALSTEEL BALL
OVERALL WIDTH1.0000 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
INTERNAL FIT-UP DESIGNATIONSTANDARD
LOAD DIRECTIONRADIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
FF-B-2844/06FAXBCInterchangeable
interchangeable cross-reference
interchangeable
L40Interchangeable
interchangeable cross-reference
interchangeable
6001637Interchangeable
interchangeable cross-reference
interchangeable
FD SEMIRIGID FLEXPROBE XLS5Interchangeable
interchangeable cross-reference
interchangeable
XLS5Interchangeable
interchangeable cross-reference
interchangeable
FD FP XLS5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy XLS5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is XLS5?
XLS5 is a BEARING,BALL,ANNULAR.
What parts can replace XLS5?
There are 6 known substitutes for XLS5: FF-B-2844/06FAXBC, L40, 6001637 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for XLS5?
XLS5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-109-1571. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — XLS5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026