PartsTable
Technical Data Sheet
Download PDF

XB-32322 — STUD,FRICTION CATCH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

XB-32322: STUD,FRICTION CATCH.

The STUD,FRICTION CATCH is a the manufacturer industrial component. Key specifications include length: 0.375 INCHES NOMINAL IN, material: COPPER ALLOY OVERALL, overall_width: 0.438 INCHES NOMINAL IN, overall_length: 1.062 INCHES NOMINAL IN, style_designator: POST, DOME END, surface_treatment: NICKEL OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-413-2062, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
XB-32322
NSN: 5340-01-413-2062
FSC: 5340 — Hardware, Commercial
CAGE: 2M590 — H. G. MAYBECK CO. INC. DBA HG MAYBECK CO INC (USA)
SPECIFICATIONS
length0.375 INCHES NOMINAL IN
materialCOPPER ALLOY OVERALL
overall_width0.438 INCHES NOMINAL IN
overall_length1.062 INCHES NOMINAL IN
style_designatorPOST, DOME END
surface_treatmentNICKEL OVERALL
mounting_hole_diameter0.156 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes0.625 INCHES NOMINAL IN
NSN5340-01-413-2062
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: XB-32322 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.375 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES: 0.625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: POST, DOME END
•
MOUNTING HOLE DIAMETER: 0.156 INCHES NOMINAL IN
•
SURFACE TREATMENT: NICKEL OVERALL
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS
LENGTH0.375 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES0.625 INCHES NOMINAL IN
STYLE DESIGNATORPOST, DOME END
MOUNTING HOLE DIAMETER0.156 INCHES NOMINAL IN
OVERALL LENGTH1.062 INCHES NOMINAL IN
OVERALL WIDTH0.438 INCHES NOMINAL IN
SURFACE TREATMENTNICKEL OVERALL
MATERIALCOPPER ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
1010494-4Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy XB-32322?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is XB-32322?
XB-32322 is a STUD,FRICTION CATCH.
What parts can replace XB-32322?
There is 1 known substitute for XB-32322: 1010494-4. Substitute compatibility should be verified for your specific system.
What is the NSN for XB-32322?
XB-32322 is cataloged in the U.S. Government catalog under NSN 5340-01-413-2062. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — XB-32322

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.