PartsTable
Technical Data Sheet
Download PDF

XA105P — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

XA105P: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OR STEEL CORROSION RESISTING RETAINER, bore_shape: STRAIGHT, bore_diameter: 8.00 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND, inner_ring_width: 0.3900 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-157-0340, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
XA105P
NSN: 3110-00-157-0340
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OR STEEL CORROSION RESISTING RETAINER
bore_shapeSTRAIGHT
bore_diameter8.00 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
shield_quantity1
inner_ring_width0.3900 INCHES NOMINAL IN
outer_ring_width0.4060 INCHES NOMINAL IN
special_featuresSEAL REMOVED,SLOT 0.0940 IN. DEEP BY 0.1880 IN. W/CUT IN FACE OF OUTER RING ON EXTENDED SIDE IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter22.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
NSN3110-00-157-0340
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: XA105P · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER RING WIDTH: 0.4060 INCHES NOMINAL IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 1
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 22.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS
OUTER RING WIDTH0.4060 INCHES NOMINAL IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
SHIELD QUANTITY1
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL OUTSIDE DIAMETER22.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SPECIAL FEATURESSEAL REMOVED,SLOT 0.0940 IN. DEEP BY 0.1880 IN. W/CUT IN FACE OF OUTER RING ON EXTENDED SIDE IN
STANDARD TOLERANCE DESIGNATIONABEC NO.1
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy XA105P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is XA105P?
XA105P is a BEARING,BALL,ANNULAR.
What is the NSN for XA105P?
XA105P is cataloged in the U.S. Government catalog under NSN 3110-00-157-0340. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — XA105P