PartsTable
Technical Data Sheet
Download PDF

X940 — CONNECTOR,PLUG,ELECTRICAL

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

X940: CONNECTOR,PLUG,ELECTRICAL.

The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include angle: 60.0 DEGREES, height: 1.000 INCHES NOMINAL IN, material: STEEL OVERALL, shank_length: 0.188 INCHES NOMINAL IN, overall_width: 1.125 INCHES MAXIMUM1.125 INCHES MAXIMUM IN, inclosure_type: FULLY INCLOSEDFULLY INCLOSED. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-250-7905, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
X940
NSN: 4730-00-250-7905
NIINs: 002507905, 011004122
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 14351 — TELEDYNE CONTINENTAL MOTORS INDUSTRIAL PRODUCTS DIV TELEDYNE INDUSTRIES INC SUB OF TELEDYNE INC (USA)
SPECIFICATIONS
angle60.0 DEGREES
height1.000 INCHES NOMINAL IN
materialSTEEL OVERALL
shank_length0.188 INCHES NOMINAL IN
overall_width1.125 INCHES MAXIMUM1.125 INCHES MAXIMUM IN
inclosure_typeFULLY INCLOSEDFULLY INCLOSED
overall_height1.500 INCHES MAXIMUM1.500 INCHES MAXIMUM IN
overall_length2.575 INCHES MAXIMUM2.575 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S) SINGLE GROUPUNTHREADED HOLE(S) SINGLE GROUP
special_featuresSURFACE LOCATED BALL CHECK VALVE
style_designatorANGLE
surface_treatmentZINC OVERALL
NSN4730-00-250-7905
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: X940 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.625 INCHES NOMINAL IN
•
BYPASS RELIEF VALVE SETTING RANGE: 5.0 TO 20.0 CAMERA MOUNT
•
ASSEMBLY CLEARANCE RADIUS: 0.562 INCHES NOMINAL IN
•
SHANK LENGTH: 0.188 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ANGLE
•
NOMINAL THREAD SIZE: 0.125 INCHES IN
•
HEIGHT: 1.000 INCHES NOMINAL IN
•
ANGLE: 60.0 DEGREES
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.625 INCHES NOMINAL IN
BYPASS RELIEF VALVE SETTING RANGE5.0 TO 20.0 CAMERA MOUNT
ASSEMBLY CLEARANCE RADIUS0.562 INCHES NOMINAL IN
SHANK LENGTH0.188 INCHES NOMINAL IN
STYLE DESIGNATORANGLE
NOMINAL THREAD SIZE0.125 INCHES IN
HEIGHT1.000 INCHES NOMINAL IN
ANGLE60.0 DEGREES
SPECIAL FEATURESSURFACE LOCATED BALL CHECK VALVE
SCREW THREAD SERIES DESIGNATORPTF-SPL SHORT
SUBSTITUTES & CROSS-REFERENCES 7
7412917Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
11J24Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
4730002507905Reference document
Same NSN cross-reference
Reference document — Informative reference only
7348969Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
62022R91Reference document
Same NSN cross-reference
Reference document — Secondary reference
487-80011Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy X940?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is X940?
X940 is a CONNECTOR,PLUG,ELECTRICAL.
What parts can replace X940?
There are 7 known substitutes for X940: 7412917, 11J24, 4730002507905 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for X940?
X940 is cataloged in the U.S. Government catalog under NSN 4730-00-250-7905. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — X940

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.