X79-94 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

X79-94: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include head_style: FLAT CHAMFER, head_height: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, thread_length: 0.500 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN, fastener_length: 0.600 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-122-4699, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

X79-94

NSN: 5305-01-122-4699
FSC: 5305 — Screws
CAGE: 13829 — PARKER HANNIFIN CORPORATION DIV CYLINDER DIVISION (USA)

SPECIFICATIONS

head_style	FLAT CHAMFER
head_height	0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_class	3A A
head_diameter	0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
thread_length	0.500 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
fastener_length	0.600 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
nominal_thread_diameter	0.250 INCHES IN
thread_quantity_per_inch	20
thread_series_designator	UNIFIED NATIONAL COARSE (UNC)
NSN	5305-01-122-4699

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.600 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN

•

THREAD LENGTH: 0.500 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN

•

NOMINAL THREAD DIAMETER: 0.250 INCHES IN

•

HEAD STYLE: FLAT CHAMFER

•

THREAD DIRECTION: RIGHT-HAND

•

THREAD CLASS: 3A A

•

THREAD QUANTITY PER INCH: 20

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
FASTENER LENGTH	0.600 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
THREAD LENGTH	0.500 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER	0.250 INCHES IN
HEAD STYLE	FLAT CHAMFER
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	3A A
THREAD QUANTITY PER INCH	20
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)
HEAD DIAMETER	0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753

SUBSTITUTES & CROSS-REFERENCES 1

4907638-3Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy X79-94?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is X79-94?

X79-94 is a SCREW,CAP,SOCKET HEAD.

What parts can replace X79-94?

There is 1 known substitute for X79-94: 4907638-3. Substitute compatibility should be verified for your specific system.

What is the NSN for X79-94?

X79-94 is cataloged in the U.S. Government catalog under NSN 5305-01-122-4699. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

X79-94 — SCREW,CAP,SOCKET HEAD

Request a Quote — X79-94