PartsTable
Technical Data Sheet
Download PDF

X7 — PRINTER,THREE-DIMENSIONAL

✓ Government record, cited
Nilox · COMPONENT
PRODUCT OVERVIEW

X7: PRINTER,THREE-DIMENSIONAL.

The PRINTER,THREE-DIMENSIONAL is a Nilox industrial component. Key specifications include material: STEEL OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, coil_quantity: 8-1/2, inside_diameter: 3.125 INCHES NOMINAL IN, style_designator: CYLINDRICAL, surface_treatment: CADMIUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5360-00-559-5152, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
X7
NSN: 5360-00-559-5152
NIINs: 005595152, 016974358
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 75954 — KUNKLE INDUSTRIES INC LONERGAN VALVE DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
coil_quantity8-1/2
inside_diameter3.125 INCHES NOMINAL IN
style_designatorCYLINDRICAL
surface_treatmentCADMIUM OVERALL
spring_free_length8.437 INCHES NOMINAL IN
coil_helix_directionRIGHT-HAND OR LEFT-HAND
spring_free_outside_diameter3.875 INCHES NOMINAL IN
NSN5360-00-559-5152
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR MFR: Nilox PRINTER,THREE-DIMENSIONAL TITLE COMPONENT PN X7 MFR Nilox PRINTER,THREE-DIMENSIO
KEY FEATURES
•
SPRING FREE OUTSIDE DIAMETER: 3.875 INCHES NOMINAL IN
•
END STYLE: SPRING END,SQUARED AND GROUND BOTH ENDS
•
STYLE DESIGNATOR: CYLINDRICAL
•
SPRING FREE LENGTH: 8.437 INCHES NOMINAL IN
•
INSIDE DIAMETER: 3.125 INCHES NOMINAL IN
•
COIL QUANTITY: 8-1/2
•
SURFACE TREATMENT: CADMIUM OVERALL
•
COIL HELIX DIRECTION: RIGHT-HAND OR LEFT-HAND
TECHNICAL CHARACTERISTICS
SPRING FREE OUTSIDE DIAMETER3.875 INCHES NOMINAL IN
END STYLESPRING END,SQUARED AND GROUND BOTH ENDS
STYLE DESIGNATORCYLINDRICAL
SPRING FREE LENGTH8.437 INCHES NOMINAL IN
INSIDE DIAMETER3.125 INCHES NOMINAL IN
COIL QUANTITY8-1/2
SURFACE TREATMENTCADMIUM OVERALL
COIL HELIX DIRECTIONRIGHT-HAND OR LEFT-HAND
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
000-200-2239Reference document
Same NSN cross-reference
Reference document — Secondary reference
000.238.2239Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy X7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is X7?
X7 is a PRINTER,THREE-DIMENSIONAL manufactured by Nilox.
What parts can replace X7?
There are 2 known substitutes for X7: 000-200-2239, 000.238.2239. Substitute compatibility should be verified for your specific system.
What is the NSN for X7?
X7 is cataloged in the U.S. Government catalog under NSN 5360-00-559-5152. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — X7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.