PartsTable
Technical Data Sheet
PartsTable / COMPONENT / X65D4-1-1-4
X65D4-1-1-4 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING ASSEMBLY is a the manufacturer industrial component. Key specifications include height: 0.922 INCHES NOMINAL IN, material: RUBBER AND COTTON INTERMEDIATE RING, inside_diameter: 1.258 INCHES NOMINAL IN, outside_diameter: 1.742 INCHES NOMINAL IN, cross-sectional_shape_style: V BOTTOM RING. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-355-2557, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
X65D4-1-1-4
NSN: 5330-00-355-2557
FSC: 5330
CAGE: 0E9N0 — DAVID BROWN HYDRAULICS INC DBA HYDRECO (USA)
SPECIFICATIONS
height0.922 INCHES NOMINAL IN
materialRUBBER AND COTTON INTERMEDIATE RING
inside_diameter1.258 INCHES NOMINAL IN
outside_diameter1.742 INCHES NOMINAL IN
intermediate_ring_quantity4
cross-sectional_shape_styleV BOTTOM RING
NSN5330-00-355-2557
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: X65D4-1-1-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: V BOTTOM RING
•
INTERMEDIATE RING QUANTITY: 4
•
MATERIAL: RUBBER AND COTTON INTERMEDIATE RING
•
HEIGHT: 0.922 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.742 INCHES NOMINAL IN
•
INSIDE DIAMETER: 1.258 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLEV BOTTOM RING
INTERMEDIATE RING QUANTITY4
MATERIALRUBBER AND COTTON INTERMEDIATE RING
HEIGHT0.922 INCHES NOMINAL IN
OUTSIDE DIAMETER1.742 INCHES NOMINAL IN
MATERIALCOTTON BOTTOM RING
INSIDE DIAMETER1.258 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
PA3460Interchangeable
interchangeable cross-reference
interchangeable
ASTM B221Interchangeable
interchangeable cross-reference
interchangeable
60-3829Interchangeable
interchangeable cross-reference
interchangeable
6240PL1337663Interchangeable
interchangeable cross-reference
interchangeable
CML620282Interchangeable
interchangeable cross-reference
interchangeable
RCL-B52-02182Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy X65D4-1-1-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is X65D4-1-1-4?
X65D4-1-1-4 is a PACKING ASSEMBLY.
What parts can replace X65D4-1-1-4?
There are 21 known substitutes for X65D4-1-1-4: PA3460, ASTM B221, 60-3829 and 18 more. Substitute compatibility should be verified for your specific system.
Is X65D4-1-1-4 still available?
X65D4-1-1-4 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — X65D4-1-1-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026