PartsTable
Technical Data Sheet
Download PDF

X4-76 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

X4-76: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.547 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), hardness_rating: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-119-2075, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
X4-76
NSN: 5310-00-119-2075
FSC: 5310 — Nuts and Washers
CAGE: 13829 — PARKER HANNIFIN CORPORATION DIV CYLINDER DIVISION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.547 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
hardness_rating23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
width_across_flats0.938 INCHES NOMINAL IN
nominal_thread_size0.625 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
thread_quantity_per_inch11
NSN5310-00-119-2075
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: X4-76 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.938 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.625 INCHES IN
•
NUT HEIGHT: 0.547 INCHES NOMINAL IN
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.938 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
HARDNESS RATING23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.625 INCHES IN
NUT HEIGHT0.547 INCHES NOMINAL IN
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH11
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
129-561Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy X4-76?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is X4-76?
X4-76 is a NUT,PLAIN,HEXAGON.
What parts can replace X4-76?
There is 1 known substitute for X4-76: 129-561. Substitute compatibility should be verified for your specific system.
What is the NSN for X4-76?
X4-76 is cataloged in the U.S. Government catalog under NSN 5310-00-119-2075. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — X4-76