PartsTable
Technical Data Sheet
PartsTable / COMPONENT / X3064-17
X3064-17 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 1.0000 INCHES NOMINAL IN, cone_width: 1.2910 INCHES NOMINAL IN, bore_diameter: 2.0000 INCHES NOMINAL IN, overall_width: 1.4375 INCHES NOMINAL IN, standout_width: 0.4375 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-5828, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
X3064-17
NSN: 3110-00-100-5828
FSC: 3110
CAGE: 59958 — CLEVELAND GEAR COMPANY, INC. DBA CLEVELAND GEAR CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width1.0000 INCHES NOMINAL IN
cone_width1.2910 INCHES NOMINAL IN
bore_diameter2.0000 INCHES NOMINAL IN
overall_width1.4375 INCHES NOMINAL IN
standout_width0.4375 INCHES NOMINAL IN
style_designatorSTRAIGHT BORE, STEEP ANGLE
cone_corner_radius0.1400 INCHES NOMINAL IN
backface_corner_radius0.1250 INCHES NOMINAL IN
overall_outside_diameter4.4750 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-5828
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: X3064-17 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 2.0000 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CUP WIDTH: 1.0000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, STEEP ANGLE
•
MATERIAL: STEEL OVERALL
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
CONE WIDTH: 1.2910 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER2.0000 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CUP WIDTH1.0000 INCHES NOMINAL IN
OVERALL WIDTH1.4375 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, STEEP ANGLE
MATERIALSTEEL OVERALL
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
CONE WIDTH1.2910 INCHES NOMINAL IN
STANDOUT WIDTH0.4375 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER4.4750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
10095Interchangeable
interchangeable cross-reference
interchangeable
5307KFInterchangeable
interchangeable cross-reference
interchangeable
200BInterchangeable
interchangeable cross-reference
interchangeable
S65Interchangeable
interchangeable cross-reference
interchangeable
110 1-31/64Interchangeable
interchangeable cross-reference
interchangeable
53195Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy X3064-17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is X3064-17?
X3064-17 is a BEARING,ROLLER,TAPERED.
What parts can replace X3064-17?
There are 17 known substitutes for X3064-17: 10095, 5307KF, 200B and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for X3064-17?
X3064-17 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-5828. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — X3064-17

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026