PartsTable
Technical Data Sheet
Download PDF

X2508 — SEAL,NONMETALLIC SPECIAL SHAPED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

X2508: SEAL,NONMETALLIC SPECIAL SHAPED.

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include material: RUBBER SILICONE CLASS Q OVERALL, construction: SPLIT, style_designator: CIRCULAR, aperture_diameter: 16.520 INCHES NOMINAL IN, fabrication_method: SOLID, cross-sectional_width: 0.844 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-227-0068, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
X2508
NSN: 5330-00-227-0068
FSC: 5330 — Packing and Gasket Materials
CAGE: 70485 — ATLANTIC INDIA RUBBER CO INC (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q OVERALL
constructionSPLIT
style_designatorCIRCULAR
aperture_diameter16.520 INCHES NOMINAL IN
fabrication_methodSOLID
cross-sectional_width0.844 INCHES NOMINAL IN
cross-sectional_height0.344 INCHES NOMINAL IN
cross-sectional_shape_styleU SHAPE
NSN5330-00-227-0068
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: X2508 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.344 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.844 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: U SHAPE
•
APERTURE DIAMETER: 16.520 INCHES NOMINAL IN
•
MATERIAL: RUBBER SILICONE CLASS Q OVERALL
•
FABRICATION METHOD: SOLID
•
CONSTRUCTION: SPLIT
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.344 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.844 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLEU SHAPE
APERTURE DIAMETER16.520 INCHES NOMINAL IN
MATERIALRUBBER SILICONE CLASS Q OVERALL
FABRICATION METHODSOLID
CONSTRUCTIONSPLIT
SUBSTITUTES & CROSS-REFERENCES 1
004384Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy X2508?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is X2508?
X2508 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What parts can replace X2508?
There is 1 known substitute for X2508: 004384. Substitute compatibility should be verified for your specific system.
What is the NSN for X2508?
X2508 is cataloged in the U.S. Government catalog under NSN 5330-00-227-0068. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — X2508