X218-103 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

X218-103: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.109 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL CORROSION RESISTING BAND, overall_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-270-4308, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

X218-103

NSN: 5340-01-270-4308
FSC: 5340 — Hardware, Commercial
CAGE: 78570 — SMITHS TUBULAR SYSTEMS-LACONIA, INC. (USA)

SPECIFICATIONS

diameter	0.109 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material	STEEL CORROSION RESISTING BAND
overall_width	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
loop_inside_diameter	1.344 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end	1.374 INCHES MINIMUM AND 1.404 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole	1.161 INCHES MINIMUM AND 1.181 INCHES MAXIMUM IN
NSN	5340-01-270-4308

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: SINGLE LOOP

•

DIAMETER: 0.109 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.374 INCHES MINIMUM AND 1.404 INCHES MAXIMUM IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.161 INCHES MINIMUM AND 1.181 INCHES MAXIMUM IN

•

MATERIAL: STEEL CORROSION RESISTING BAND

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	SINGLE LOOP
DIAMETER	0.109 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.374 INCHES MINIMUM AND 1.404 INCHES MAXIMUM IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	1.161 INCHES MINIMUM AND 1.181 INCHES MAXIMUM IN
MATERIAL	STEEL CORROSION RESISTING BAND
LOOP INSIDE DIAMETER	1.344 INCHES NOMINAL IN

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 1

AS3257-24Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy X218-103?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is X218-103?

X218-103 is a CLAMP,LOOP.

What parts can replace X218-103?

There is 1 known substitute for X218-103: AS3257-24. Substitute compatibility should be verified for your specific system.

What is the NSN for X218-103?

X218-103 is cataloged in the U.S. Government catalog under NSN 5340-01-270-4308. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

X218-103 — CLAMP,LOOP

Request a Quote — X218-103