PartsTable
Technical Data Sheet
PartsTable / COMPONENT / X1X914X0X
X1X914X0X ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The LATCH SET,MORTISE is a the manufacturer industrial component. Key specifications include width: 3.500 INCHES NOMINAL IN, length: 4.500 INCHES NOMINAL IN, thickness: 1.375 INCHES NOMINAL HOUSING IN, style_designator: RECTANGULAR, end_item_identification: 4120014423543. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-472-6815, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
X1X914X0X
NSN: 5340-01-472-6815
FSC: 5340
CAGE: 0BJJ7 — VERSCH LOCK MFG CO INC (USA)
SPECIFICATIONS
width3.500 INCHES NOMINAL IN
length4.500 INCHES NOMINAL IN
thickness1.375 INCHES NOMINAL HOUSING IN
style_designatorRECTANGULAR
end_item_identification4120014423543
NSN5340-01-472-6815
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: X1X914X0X MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THICKNESS: 1.375 INCHES NOMINAL HOUSING IN
•
WIDTH: 3.500 INCHES NOMINAL IN
•
LENGTH: 4.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
THICKNESS1.375 INCHES NOMINAL HOUSING IN
END ITEM IDENTIFICATION4120014423543
WIDTH3.500 INCHES NOMINAL IN
LENGTH4.500 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
70R93Interchangeable
interchangeable cross-reference
interchangeable
10RM0166Interchangeable
interchangeable cross-reference
interchangeable
801E5871Interchangeable
interchangeable cross-reference
interchangeable
D-21380Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy X1X914X0X?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is X1X914X0X?
X1X914X0X is a LATCH SET,MORTISE.
What parts can replace X1X914X0X?
There are 4 known substitutes for X1X914X0X: 70R93, 10RM0166, 801E5871 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for X1X914X0X?
X1X914X0X is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-472-6815. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — X1X914X0X

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026