PartsTable
Technical Data Sheet
Download PDF

X18521 — NUT,SELF-LOCKING,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

X18521: NUT,SELF-LOCKING,HEXAGON.

The NUT,SELF-LOCKING,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1118 NUT, nut_style: HEXAGON, nut_height: 0.281 INCHES NOMINAL IN, thread_class: 3B, thread_series: UNS, locking_feature: PREVAILING TORQUE WITH NONMETALLIC INSERT. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-791-9546, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
X18521
NSN: 5310-00-791-9546
FSC: 5310 — Nuts and Washers
CAGE: 14351 — TELEDYNE CONTINENTAL MOTORS INDUSTRIAL PRODUCTS DIV TELEDYNE INDUSTRIES INC SUB OF TELEDYNE INC (USA)
SPECIFICATIONS
materialSTEEL COMP 1118 NUT
nut_styleHEXAGON
nut_height0.281 INCHES NOMINAL IN
thread_class3B
thread_seriesUNS
locking_featurePREVAILING TORQUE WITH NONMETALLIC INSERT
thread_directionRIGHT-HAND
width_across_flats1.428 INCHES MINIMUM AND 1.440 INCHES MAXIMUM IN
nominal_thread_size1.000 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch18
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE NUT
NSN5310-00-791-9546
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: X18521 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.428 INCHES MINIMUM AND 1.440 INCHES MAXIMUM IN
•
THREAD SERIES: UNS
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE NUT
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.000 INCHES IN
•
LOCKING FEATURE: PREVAILING TORQUE WITH NONMETALLIC INSERT
•
NUT HEIGHT: 0.281 INCHES NOMINAL IN
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.428 INCHES MINIMUM AND 1.440 INCHES MAXIMUM IN
THREAD SERIESUNS
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE NUT
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.000 INCHES IN
LOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERT
NUT HEIGHT0.281 INCHES NOMINAL IN
NUT STYLEHEXAGON
THREAD CLASS3B
THREAD QUANTITY PER INCH18
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
49NTE6306-1618Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy X18521?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is X18521?
X18521 is a NUT,SELF-LOCKING,HEXAGON.
What parts can replace X18521?
There is 1 known substitute for X18521: 49NTE6306-1618. Substitute compatibility should be verified for your specific system.
What is the NSN for X18521?
X18521 is cataloged in the U.S. Government catalog under NSN 5310-00-791-9546. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — X18521