PartsTable
Technical Data Sheet
Download PDF

X14544 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

X14544: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.175 INCHES NOMINAL IN, hole_diameter: 0.781 INCHES NOMINAL IN, overall_diameter: 2.000 INCHES NOMINAL IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-487-5316, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
X14544
NSN: 5310-00-487-5316
FSC: 5310 — Nuts and Washers
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.175 INCHES NOMINAL IN
hole_diameter0.781 INCHES NOMINAL IN
overall_diameter2.000 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
inside_left_corner_chamfer_angle45.0 DEGREES NOMINAL
inside_right_corner_chamfer_angle60.0 DEGREES NOMINAL
part_name_assigned_by_controlling_agencyNAVY SPECIAL PROJECT
NSN5310-00-487-5316
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: X14544 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 2.000 INCHES NOMINAL IN
•
INSIDE RIGHT CORNER CHAMFER ANGLE: 60.0 DEGREES NOMINAL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
INSIDE LEFT CORNER CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER2.000 INCHES NOMINAL IN
INSIDE RIGHT CORNER CHAMFER ANGLE60.0 DEGREES NOMINAL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
INSIDE LEFT CORNER CHAMFER ANGLE45.0 DEGREES NOMINAL
PERIPHERAL SHAPE STYLEROUND
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
MATERIALSTEEL OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.781 INCHES NOMINAL IN
THICKNESS0.175 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy X14544?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is X14544?
X14544 is a WASHER,FLAT.
What is the NSN for X14544?
X14544 is cataloged in the U.S. Government catalog under NSN 5310-00-487-5316. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — X14544

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.