PartsTable
Technical Data Sheet
Download PDF

X144-3 — WASHER

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

X144-3: WASHER.

The WASHER is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN, hole_diameter: 0.646 INCHES MINIMUM AND 0.666 INCHES MAXIMUM IN, overall_diameter: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN, surface_treatment: CADMIUM OR ZINC OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-440-3029, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
X144-3
NSN: 5310-00-440-3029
NIINs: 004403029, 011036708
FSC: 5310 — Nuts and Washers
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
hole_diameter0.646 INCHES MINIMUM AND 0.666 INCHES MAXIMUM IN
overall_diameter1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
surface_treatmentCADMIUM OR ZINC OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-00-440-3029
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: X144-3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.646 INCHES MINIMUM AND 0.666 INCHES MAXIMUM IN
•
THICKNESS: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.646 INCHES MINIMUM AND 0.666 INCHES MAXIMUM IN
THICKNESS0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
B1733Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
D31957Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy X144-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is X144-3?
X144-3 is a WASHER.
What parts can replace X144-3?
There are 2 known substitutes for X144-3: B1733, D31957. Substitute compatibility should be verified for your specific system.
What is the NSN for X144-3?
X144-3 is cataloged in the U.S. Government catalog under NSN 5310-00-440-3029. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — X144-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.